KidWind Basic Wind Experiment Kit - Single Kit

CHF 303.70*

Content: 1 Stück

Prices incl. VAT plus shipping costs

delivery time: usually around 3 weeks

Product number: KW-BWX

Product information "KidWind Basic Wind Experiment Kit - Single Kit"

This popular kit allows young scientists to test a variety of blade designs, generate electricity, and lift weights.

Specifications

Height: 24 in
Maximum blade diameter: 36 in (27 in with provided materials)
Maximum number of blades: 12
Expected power output: 0–1 watts
Table or floor space needed: 18 in diameter circle

What's included

Basic Wind Experiment Kit
Wind Turbine Generator with Wires (1)
Nacelle Body Half (2)
Motor Mount Pack (1)
8″ Hex Shaft with Hub Quick Connect (1)
Wind Turbine Hub (1)
Power Output Board (1)
Tower Base Leg (3)
Tower Base Locking Ring (1)
Tower Base Hub (1)
Plastic Weightlifter Bucket (1)
Blade Pitch Protractor (1)
Hex Lock (3)
Spool (1)
Gear Set (8-, 16-, 32-, and 64-tooth gears) (1)
20″ Tower (1)
1/2″ Washer (25)
Dowels* (25)
Power Output Pack* (1)
3″ x 12″ x 3/32″ Balsa Wood Sheet* (5)
3″ x 12″ Chipboard Blade Sheet* (10)
4′ String* (4)

Classroom Pack

Wind Turbine Generator with Wires (3)
Nacelle Body Half (6)
Motor Mount Pack (3)
8″ Hex Shaft with Hub Quick Connect (3)
Wind Turbine Hub (8)
Power Output Board (1)
Tower Base Leg (9)
Tower Base Locking Ring (3)
Tower Base Hub (3)
Plastic Weightlifter Bucket (3)
Blade Pitch Protractor (3)
Hex Lock (9)
Spool (3)
Gear Set (8-, 16-, 32-, and 64-tooth gears) (3)
20″ Tower (3)
1/2″ Washer (75)
Dowels* (150)
Power Output Pack* (3)
3″ x 12″ x 3/32″ Balsa Wood Sheet* (25)
3″ x 12″ Chipboard Blade Sheet* (50)
4′ String* (4)
8 1/2″ x 11″ Chipboard Sheet* (25)
This part is a consumable and is excluded from the warranty.
Note: The Basic Wind Experiment Kit and Classroom Pack does not include experiment instructions, basic tools (glue, scissors, screwdriver, etc.) or a multimeter. You can measure current and voltage from the turbines using a Go Direct® Energy Sensor, and an optional Vernier Variable Load or Vernier Resistor Board.

User Manual - KW-BWX

Fach:	Vernier, design, physics, renewable energy

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

KidWind Basic Wind Experiment Kit - Classroom Pack

This popular kit allows young scientists to test a variety of blade designs, generate electricity, and lift weights. Specifications Height: 24 in Maximum blade diameter: 36 in (27 in with provided materials) Maximum number of blades: 12 Expected power output: 0–1 watts Table or floor space needed: 18 in diameter circle What's included Basic Wind Experiment Kit Wind Turbine Generator with Wires (1) Nacelle Body Half (2) Motor Mount Pack (1) 8″ Hex Shaft with Hub Quick Connect (1) Wind Turbine Hub (1) Power Output Board (1) Tower Base Leg (3) Tower Base Locking Ring (1) Tower Base Hub (1) Plastic Weightlifter Bucket (1) Blade Pitch Protractor (1) Hex Lock (3) Spool (1) Gear Set (8-, 16-, 32-, and 64-tooth gears) (1) 20″ Tower (1) 1/2″ Washer (25) Dowels* (25) Power Output Pack* (1) 3″ x 12″ x 3/32″ Balsa Wood Sheet* (5) 3″ x 12″ Chipboard Blade Sheet* (10) 4′ String* (4) Classroom Pack Wind Turbine Generator with Wires (3) Nacelle Body Half (6) Motor Mount Pack (3) 8″ Hex Shaft with Hub Quick Connect (3) Wind Turbine Hub (8) Power Output Board (1) Tower Base Leg (9) Tower Base Locking Ring (3) Tower Base Hub (3) Plastic Weightlifter Bucket (3) Blade Pitch Protractor (3) Hex Lock (9) Spool (3) Gear Set (8-, 16-, 32-, and 64-tooth gears) (3) 20″ Tower (3) 1/2″ Washer (75) Dowels* (150) Power Output Pack* (3) 3″ x 12″ x 3/32″ Balsa Wood Sheet* (25) 3″ x 12″ Chipboard Blade Sheet* (50) 4′ String* (4) 8 1/2″ x 11″ Chipboard Sheet* (25) This part is a consumable and is excluded from the warranty. Note: The Basic Wind Experiment Kit and Classroom Pack does not include experiment instructions, basic tools (glue, scissors, screwdriver, etc.) or a multimeter. You can measure current and voltage from the turbines using a Go Direct® Energy Sensor, and an optional Vernier Variable Load or Vernier Resistor Board. User Manual - KW-BWXC

CHF 813.40*

Chipboard Sheets

Chipboard is a stiff, easy to cut, lightweight, low cost, and recyclable material used to make simple wind turbine blades. Specifications Length: 12 in Width: 3 in Thickness: 1.5 mm User Manual - KW-CB50

Content: 50 Paket(e) (CHF 0.77* / 1 Paket(e))

CHF 38.70*

Anemometer

Use the Anemometer to measure wind speed in a variety of experiments. Hold the sensor in your hand to measure wind speed in dynamic environments or use the accessory rod to position it in front of wind tunnels or fans. Specifications Range: 0.5 m/s – 30 m/s Resolution: 1.2 x 10-2 m/s (LabQuest 2, LabQuest, LabQuest Mini, Go!Link, LabPro) What's included Vernier Anemometer User Manual - ANM-BTA

CHF 254.80*

Vernier Variable Load

With the Vernier Variable Load, students can adjust the knobs to provide resistances between 2 and 200 Ω, allowing them to determine the optimal load on a system. Specifications Maximum Input: 0.3 A Resistance: 2 – 200 Ω What's included Vernier Variable Load Two insulated jumper wires fitted with mini-alligator clips Spare 0.375 A fast blow fuse, inside case User Manual - VES-VL

CHF 181.40*

KidWind Basic Turbine Building Parts - Single Pack

The Basic Turbine Building Parts kit includes the KidWind Hub, a wind turbine generator, and 25 dowels, all in one package. Specifications Diameter: 0.25 in Length: 5 in User Manual - KW-BTPART

CHF 38.70*

Wind Energy Explorations - E-Book

Examine renewable energy, wind power, and engineering design with these nine downloadable experiments written for middle school science. Suitable for grades 4–8. User Manual - MSB-WIND-E

CHF 44.40*

Vernier Resistor Board

The Vernier Resistor Board has seven 1 W 5% resistors mounted on a circuit board. Test clip holes on either side of the resistors allow for easy connections to clips on wire leads. Specifications Resistor values: 10 Ω, 15 Ω, 20 Ω, 30 Ω, 39 Ω, 51 Ω, and 100 Ω Dimensions: 3.5 in long by 2 in wide What's included Vernier Resistor Board Four insulated jumper wires fitted with mini-alligator clips User Manual - VES-RB

CHF 38.70*

Similar Items

KidWind MINI Wind Turbine with Blade Design - Wind Turbine Only

Demonstrate the power of the wind with an affordable and rugged wind turbine. Specifications Height: 12 in Maximum blade diameter: 8 in (Mini Turbine), 16 in. (with blade design option) Expected power output: 0-1 watts Table of floor space needed: 6 in. diameter circle What's included Mini Wind Turbine with Blade Design Mini Nacelle Assembly (1) 10″ Mini Aluminum Tower (1) Mini Base (1) Red Blade Set (1) Sound and Light Board (1) Red Alligator Clip Cord (1) Black Alligator Clip Cord (1) Wind Turbine Hub (1) 1/4″ x 5″ Dowels* (25) 3″ x 8″ Chipboard sheet* (10) Blade Pitch Protractor (1) Mini Wind Turbine Mini Nacelle Assembly (1) 10″ Mini Aluminum Tower (1) Mini Base (1) Red Blade Set (1) Sound and Light Board (1) Red Alligator Clip Cord (1) Black Alligator Clip Cord (1) This part is a consumable and is excluded from warranty. Note: The Mini Wind Turbine does not include a multimeter. You can measure current and voltage from the turbines using a Go Direct® Energy Sensor, and an optional Vernier Variable Load or Vernier Resistor Board. User Manual - KW-MWT

CHF 112.10*

KidWind Advanced Wind Experiment Kit - Single Kit

Discover advanced aspects of wind turbine technology. Test different blade designs, gear ratios, generators, and devices to measure electrical and weightlifting power. What's included Advanced Wind Experiment Kit Gear Set (8-, 16-, 32-, and 64-tooth gears) (1) Hex Locks (3) Spool (1) Wind Turbine Generator with Wires (1) High Torque Generator with Wires (1) Motor Mount Pack (2) Wind Turbine Hub (1) Power Output Board (1) Nacelle Body Half (2) Tower Base Leg (3) Tower Base Locking Ring (1) Tower Base Hub (1) Plastic Weightlifter Bucket (1) 250 ml Graduated Cylinder (1) Blade Pitch Protractor (1) 20″ Tower (1) 1/2″ Washer (25) Small Water Pump (1) 12″ x 1/4″ Clear Tubing (1) 8″ Hex Shaft with Hub Quick Connect (1) 1/4″ x 5″ Dowels* (25) Power Output Pack* (1) 3″ x 12″ x 3/32″ Balsa Wood Sheet* (5) 3″ x 12″ Chipboard Blade Sheet* (10) 4′ String* (1) Classroom Pack Gear Set (8-, 16-, 32-, and 64-tooth gears) (3) Hex Locks (9) Spool (3) Wind Turbine Generator with Wires (3) High Torque Generator with Wires (3) Motor Mount Pack (4) Wind Turbine Hub (8) Power Output Board (1) Nacelle Body Half (6) Tower Base Leg (9) Tower Base Locking Ring (3) Tower Base Hub (3) Plastic Weightlifter Bucket (3) 250 ml Graduated Cylinder (1) Blade Pitch Protractor (3) 20″ Tower (3) 1/2″ Washer (75) Small Water Pump (1) 12″ x 1/4″ Clear Tubing (1) 8″ Hex Shaft with Hub Quick Connect (3) 1/4″ x 5″ Dowels* (150) Power Output Pack* (3) 3″ x 12″ x 3/32″ Balsa Wood Sheet* (25) 3″ x 12″ Chipboard Blade Sheet* (50) 4′ String* (3) 8 1/2″ x 11″ Chipboard Sheet* (25) This part is a consumable and is excluded from the warranty. Note: The Advanced Wind Experiment Kit and Classroom Pack do not include basic tools (glue, scissors, screwdriver, etc.) or a multimeter. You can measure current and voltage from the turbines using a Go Direct® Energy Sensor, and an optional Vernier Variable Load or Vernier Resistor Board. User Manual - KW-AWX

CHF 385.30*

KidWind simpleGEN - Single Unit

The simpleGEN is an easy-to-build AC generator that allows students to explore the basics of electrical generator design. User Manual - KW-SGEN

CHF 173.20*