Vernier Energy Sensor

234.40 CHF*

Contenu : 1 Stück

délai de livraison: généralement environ 3 semaines

Réf. produit : VES-BTA

Informations sur le produit "Vernier Energy Sensor"

The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits.

Setting up a circuit to study renewable energy systems such as wind turbines or solar panels is easy with the Vernier Energy Sensor. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load (VES-VL) or a resistor on Vernier Resistor Board (VES-RB) to the other side.

The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.

Source Input Potential Range:
± 30 V

Source Input Current Range:
± 1000 mA

User manual

Bildungsstufe:	Sec. II & tertiaire, Secondaire II, cycle 2
DataLogger Schnittstellen:	LabQuest, SensorDAQ
Fach:	physique, énergie renouvelable
Fachbereich:	Natur, Mensch, Gesellschaft - NMG, Physik

0 sur 0 évaluations

Laissez une évaluation !

Partagez avec d'autres clients votre avis sur le produit.

Connexion

Votre adresse e-mail

Votre mot de passe

Afficher les évaluations uniquement dans la langue actuelle.

Aucun avis n'a été trouvé. Partagez vos idées avec d'autres personnes.

Accessory Items

Anemometer

Das Vernier-Anemometer ist ein Flügelrad-Anemometer, das Windgeschwindigkeiten von 0,5 bis 30 m/s misst. Das Anemometer passt in Ihre Hand und erlaubt somit Windmessungen im Freien. Mit der Standardvorrichtung zum Anbringen einer Kamera an der Rückseite und einem zusätzlichen Stab, können Sie den Windmesser in einem Windkanal anbringen oder vor Ventilatoren, um Experimente mit Windturbinen durchzuführen. Bereich:0,5 m/s ~ 30 m/s Auflösung: 10-bit Auflösung (mit CBL2): 4,8 x 10-2 m/s 12-bit Auflösung (mit LabQuest, LabQuest Mini, LabPro, Go!Link, Easy Link): 1,2 x 10-2 m/s 13-bit Auflösung (mit SensorDAQ): 6,0 x 10-2 m/s anm-bta-user-manual

254.80 CHF*

KidWind Advanced Wind Experiment Kit - Single Kit

Perform all of the same investigations as the Basic Wind Experiment Kit with the ability to generate more power at higher voltages ( 0.5 V–20 V). Discover advanced concepts of wind turbine technology, including es and generator construction (with the GenPack add-on). Students can use the blades they design to generate electricity, lift weights, and pump water. This kit is perfect for grades 7–12 and college. All you need to add is a wind source, basic tools, and imagination!

385.30 CHF*

Renewable Energy with Vernier - Print and E-Book

The Renewable Energy with Vernier lab book features 26 experiments in wind and solar energy. The lab book contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects, and more. In this book, students learn about renewable energy, experiment with variables affecting power output from model wind turbines and solar panels, and participate in engineering projects such as building a wind farm or a solar charger to meet certain design criteria. Aligned with the Next Generation Science Standards, NGSS, all of the experiments are designed to support students in three-dimensional learning with Disciplinary Core Ideas, Science and Engineering Practices, and Crosscutting Concepts identified for each experiment within the Instructor pages. Many of the experiments use the Vernier Energy Sensor and the Vernier Variable Load, two products that were designed to measure the power and energy output of renewable energy sources. The experiments also use the KidWind Advanced Wind Experiment Kits (KW-AWX) and Solar Thermal Exploration Kit (KW-STXK) .

120.20 CHF*

Éolienne KidWind MINI avec conception de lames

La mini éolienne KidWind avec conception de pales permet aux élèves d'explorer les concepts de base de production d'énergie éolienne et de conception de pales comme le pas, la surface, la masse, la quantité et le matériau sur un bureau à l'aide d'un petit ventilateur de maison. Cette trousse est la trousse recommandée pour Investigating Wind Energy. La mini éolienne KidWind est une éolienne simple et facile à construire dotée d'un ensemble de pales efficace et de conception optimale qui permet d'allumer une ampoule LED à l'aide d'un petit ventilateur de maison.

152.90 CHF*

Vernier Variable Load

The Vernier Variable Load is used in conjunction with the Vernier Energy Sensor to provide a range of resistive loads for projects such as wind turbines or solar panels. Students can adjust the potentiometer to provide resistances between 6 and 255 Ω, allowing them to determine the optimal load on a system. Maximum Input:0.22 A Resistance:6 – 255 Ω Included:Vernier Variable LoadTwo insulated jumper wires fitted with mini-alligator clipsUser manual

181.40 CHF*

KidWind Small Water Pump with Tubing

The KidWind Low Voltage Water Pump is a great way to demonstrate power output from the wind and solar kits. It makes comparing different turbine designs easy; simply measure how high different turbines can pump water using this mini pump. Note: This pump works with the Advanced Wind Experiment Kit, not the Basic Wind Experiment Kit or MINI Wind Turbine.

22.40 CHF*

Similar Items

High Current Sensor

Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. The High Current Sensor has a range of ±10 A. Current is measured with a Hall Effect sensor, which uses the magnetic field created by the current and therefore does not add a resistive element to the circuit. A metal shield over the Hall Effect chip reduces the influence of external magnets. A replaceable fuse protects the equipment and circuit. High Current Sensor range:±10 A Maximum voltage input:±40 V Typical Resolution:4.9 mA User manual

214.00 CHF*

Go Direct® Energy Sensor

Description Simpler to use than a multimeter, the Go Direct Energy Sensor measures the voltage and current oputput of a renewable energy system. Connect a source, such as a small wind turbine or solar panel, and our free Graphical Analysis 4 app displays voltage, current, power, and energy output. For simple energy measurements, Go Direct Energy includes a fixed load of 30 Ω. For more advanced experiments, electrical contacts are built into the sensor to connect to an external load, such as the Variable Load, a resistor on Vernier Resistor Board, a water pump, or lights. The Go Direct Energy Sensor is ideal for a wide variety of renewable energy experiments: Investigate the electrical energy generated by a wind turbine or solar panel. Explore the effect of load on wind turbine or solar panel output. Test blade design variables and evaluate data to determine optimal blade design. Rechargeable Battery—Ready When You Are The robust rechargeable battery offers long battery life and provides always-ready operation when using the sensor wirelessly. Monitor battery life directly from our free Graphical Analysis™ 4 app or LabQuest 2 App. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students. Wired or Wireless—The Flexibility to Choose Our Go Direct sensors connect directly to your mobile device, Chromebook™, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth® wireless technology, allowing you to choose the solution best for your classroom or laboratory.

222.20 CHF*

Go Direct® Current Probe

Description Simplify your experimental setup with the Go Direct Current Probe. It connects wirelessly via Bluetooth® or wired via USB to your device. The wireless connection eliminates additional cables that can clutter the lab bench. Capture small currents like those produced by a magnet falling through a coil. Use in combination with the Go Direct Voltage Probe to investigate Ohm’s law or series and parallel circuits. Explore RC and RLC circuits. Rechargeable Battery—Ready When You Are The robust rechargeable battery offers long battery life and provides always-ready operation when using the sensor wirelessly. Monitor battery life directly from our free Graphical Analysis™ 4 app or LabQuest 2 App. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students. Wired or Wireless—The Flexibility to Choose Our Go Direct sensors connect directly to your mobile device, Chromebook™, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth® wireless technology, allowing you to choose the solution best for your classroom or laboratory. Specifications Range: +/- 1 A and +/- 0.1 A Maximum non-damaging current: 1.5 A and 0.5 A Typical resolution: 0.031 mA and 0.003 mA Connections: Wireless: Bluetooth Wired: USB

222.20 CHF*