Zubehör

Unterlagen in Deutsch, finden Sie hier: http://de.vernier.education

LabQuest® 2, LabQuest Stream™, and Go Direct SpectroVis Plus Battery

This is a replacement high-capacity, rechargeable, lithium-ion battery for the Vernier LabQuest 2 or LabQuest Stream. These batteries include a one-year warranty. With typical school use, however, the batteries will last for three years or more. More information about battery life » If you’re having problems with the battery, please see these troubleshooting tips » If you are replacing a battery, please be sure to dispose of the old battery properly.

59.10 CHF*

250 mL Nalgene Bottle w/Lid

Dies ist die gleiche Flasche, das mit dem CO2-Gas, O2 Gas und Ethanol Sensoren mitgeliefert wird.

10.10 CHF*

Plastic 2-Way Valve

Plastic stopcock with Luer-Lock connections. Part of the Pressure Sensor Accessories Kit and a replacement part for the Drop Counter

6.10 CHF*

EKG Electrodes

Each of the three leads on the EKG sensor connects to a disposable electrode. A package of 100 disposable electrodes is included with the sensor. This is a replacement package of 100 electrodes for use with the EKG sensor. For use with: EKG Sensor Qubit EKG/EMG Sensor Qubit GSR Sensor

38.70 CHF*

Vernier Spectrophotometer Optical Fiber

This is an optical fiber accessory designed exclusively for emission spectrum experiments with Vernier-branded spectrophotometers, including Go Direct® SpectroVis® Plus, Go Direct UV-VIS Spectrophotometer, Go Direct Fluorescence/UV-VIS Spectrophotometer, Vernier UV-VIS, and Vernier Fluorescence/UV-VIS. It has a wavelength range from 350 nm to 900 nm. For SpectroVis and SpectroVis Plus spectrophotometers, use the SpectroVis Optical Fiber.

161.00 CHF*

Digital Sensor Cable

This cable connects Vernier digital sensors to the digital (DIG) port on a Vernier interface. Compatible Sensors and AccessoriesMotion Detector (included with sensor)Drop Counter (included with sensor)Go!Motion Note: The Digital Sensor Cable is not compatible with the Photogate

16.30 CHF*

Replacement Rod, 5 inch

Ein Ersatzstab für den Dual-Range Force Sensor, Photogate oder Wireless Dynamics Sensor System.

10.10 CHF*

Adjustable End Stop

Attaches to the end of the Vernier Dynamics Track to prevent the cart from leaving the track.

18.30 CHF*

Luer-Lock Connector

Small connector that fits in the end of the plastic tubing and allows a Luer-Lock connection. Part of the Pressure Sensor Accessories Kit.

2.00 CHF*

Electrode Support

The Vernier Electrode Support connects to all standard ring-stand posts to keep sensors firmly in place during an experiment. The Electrode Support is a great complement to the Vernier Stir Station, as well as a perfect holder for many sensors. It is built to connect to all standard ring-stand posts; its large-handled locking nut keeps your sensors firmly in place. The larger opening (13 mm in diameter) is perfect for our pH, ISE, Conductivity and ORP sensors. The smaller opening (5 mm) is designed to hold our Stainless Steel Temperature Probe or the Vernier Go!Temp. The clamp end makes connecting to ring stands easy, accommodating post diameters between ~0.5 and 1 cm. The grooves on the Electrode Support to hold the wire leads for electroplating or electrolysis experiments.

20.30 CHF*

Vernier Embouts Buccaux - Spiromètre 100x

Pour une hygiène plus élevées vous pouvez permettre à chaque élève d'utiliser un embout buccal différent.

Contenu : 100 Stück (0.92 CHF* / 1 Stück)

91.70 CHF*

BioChamber 2000

The BioChamber 2000 is a 2000 mL plastic chamber that can be used with a CO2 Gas Sensor and an O2 Gas Sensor to monitor gaseous carbon dioxide and oxygen levels simultaneously in a closed system. The BioChamber 2000 is particularly useful when monitoring respiration and photosynthesis. The large side opening provides easy access to insert, adjust, or remove the sample.The BioChamber 2000 has two sensor ports on adjacent sides. Placing one of these ports on top, as shown, allows the O2 Gas Sensor to be in its proper vertical orientation. The CO2 Gas Sensor can then be placed in the other port on the side. Note that the two sensor ports are not equally spaced. One port is centered on its side of the chamber while the other is off-center. This was done intentionally to provide two options for your sensor orientation.If you choose not to use both ports, a size 6 rubber stopper fits snugly in the grommet. Note: While the stopper fits well, it is not guaranteed to be a water tight seal.

50.90 CHF*

Reflex Hammer Accessory Kit

Das Reflexhammer-Zubehörset verwandelt Ihren Kraftsensor in einen Reflexhammer. Verwenden Sie es, um den Hammerschlag auf eine Sehne zu erfassen. Bei Verwendung des Kits mit einem EKG-Sensor zur Aufzeichnung von EMGs können die Schüler Reflexe untersuchen. Durch Vergleichen des Zeitpunkts des Schlags mit dem Zeitpunkt der Muskelaktivität können die Schüler die Zeit berechnen, die für das Auftreten eines Reflexes erforderlich ist. Dieses Kit enthält Weitkegeliger Kopf Schmal zulaufender Kopf Halterung Griff

71.30 CHF*

Cuvette Rack

A plastic cuvette rack for holding up to 10 cuvettes during experiments.

18.30 CHF*

pH Storage Solution

Dies ist eine 500-mL-Flasche der pH-Speicherlösung. Verwenden Sie sie je nach Bedarf, um verschüttete oder kontaminierte Lösung zu ersetzen.

59.10 CHF*

Vernier Embouts Buccaux por Spiromètre

Pour une hygiène plus élevées vous pouvez permettre à chaque élève d'utiliser un embout buccal différent.

Contenu : 30 Stück (1.29 CHF* / 1 Stück)

38.70 CHF*

Go Direct® Charge Station

The Go Direct™ Charge Station is the perfect solution for charging your Go Direct Sensors. Each charge station has sixteen charging ports—eight USB and eight wand-style sensor ports. LED lights on the Go Direct sensors will show charging status. The Go Direct Charge Station is also compatible with Go Wireless devices. USB cables not included.

232.40 CHF*

Laser Pointer

This Class 2 (<1 mW) laser pointer can be used with the Vernier Photogate to produce a gate that is wider than the normal 7.5 cm spacing, making it possible to measure the speed of an automobile or of a person running. The laser case is made of aluminum, and it uses two AAA batteries (included). The wavelength of the light is 650 nm. A momentary switch (normally off) controls the laser beam.

59.10 CHF*

Ultra Pulley Attachment

Add an Ultra Pulley to your Photogate to monitor motion as a string passes over the pulley, or as the pulley rolls along a table. You can also connect the ultra pulley to our track with the Pulley Bracket.

50.90 CHF*

Breadboard Cable (Analog)

The Breadboard Cable (Analog) provides an easy way for students to build their own sensor circuitry and input the signal into a Vernier interface for data acquisition. One end of the cable is a standard British Telecom Analog (BTA) connector that plugs into Vernier interfaces. The other end of the cable is a prototyping board connector that exposes the six sensor lines on a prototyping board. Pin InformationThere are six pins available: SIG1, 5V, ID, VRES, GND, and SIG2.

30.50 CHF*

International Power Supply for LabPro, WDSS, and Stir Station

Dies ist eine 6-Volt-, DC-, Tip-negative Stromversorgung für den Einsatz mit Vernier LabPro, CBL 2, Digital Control Unit, Stir Station und Wireless Dynamics Sensor System.

59.10 CHF*

LabQuest International Power Supply

Il s'agit d'une alimentation électrique internationale pour les modèles LabQuest, LabQuest 2, LabQuest 3 et LabQuest Stream™ d'origine. Utilisez l'alimentation électrique internationale LabQuest pour charger ou alimenter les appareils pris en charge à partir de prises électriques internationales courantes. Comprend des fiches interchangeables pour les prises électriques européennes, asiatiques et américaines.Entrée : 100-240 volts CA, 50/60 Hz, 0,5 A. Sortie : 5 V, 1,5 A. Cette alimentation électrique est compatible avec les produits suivants :Constant Current SystemGo Direct® Constant Current SystemGo Direct® SpectroVis® Plus SpectrophotometerGreen Diffraction LaserLabQuest LabQuest 2 LabQuest 3 LabQuest StreamRed Diffraction Laser Replacement Light Source for Optics Expansion KitVernier Projectile Launcher

38.70 CHF*

BioChamber 250

The BioChamber 250 is a 250 mL Nalgene bottle that can be used with a CO2 Gas Sensor and an O2 Gas Sensor to monitor gaseous carbon dioxide and oxygen levels simultaneously in a closed system. The BioChamber is useful in experiments such as photosynthesis and cell respiration.With the bottle on its side, place the CO2 Gas Sensor into the neck of the BioChamber and the O2 Gas Sensor into the rubber grommet as shown. This design keeps the O2 Gas Sensor in the desired upright position while placing the CO2 Gas Sensor in an ideal position for gas level monitoring.A size 6 rubber stopper fits into the rubber grommet if an O2 Gas Sensor is not used. Note: While the stopper fits snugly in the grommet, it is not guaranteed to be a water tight seal.

18.30 CHF*

Analog BTA Cable

This cable can be used to connect your homemade analog sensors you make to Vernier interfaces. There is a BTA plug on on end and six bare wires on the other end. The cable is approximately 1.5 m long. http://www.vernier.com/support/sensor-pinouts/

10.10 CHF*

Filtre