This completely wireless system simplifies experiment setup and allows basic experiments to be conducted with or without the track.
Description
The Dynamics Cart and Track System with Go Direct Sensor Cart includes essential laboratory equipment for teaching dynamics and kinematics. Using our Go Direct Sensor Cart, students can explore force, position, velocity, and acceleration directly on their Bluetooth®-enabled device—no wires or additional equipment required. Each cart features built-in sensors to simplify experiment setup and allow experiments to be conducted on or off the track.
Specifications
Position resolution: 0.25 mm, reported by default at 1 mm steps
Force range: ±50 N
Accelerometer range: ±160 m/s2
Track length: 1.2 m
Shipping costs standard version:
The standard version 1.2m is sent as PostPac Economy bulky goods. The total shipping costs are CHF 31.00.
Shipping costs long version:
The long track version 2.2m is shipped by freight forwarding. The costs for shipping amount to a total of CHF 74.00.
The Combination Dynamics Track and Optical Bench is aluminum and includes a metric scale. Extremely rigid, this 1.2 meter track will not sag under use. The track includes 2 Adjustable Two Foot Levelers.
Dieser Artikel wird mit PostPac Economy Sperrgut versendet. Die Kosten für den Versand sind insgesamt 31 CHF.
The Motion Detector Reflector Flag is used to make the setup of motion detector-based experiments less critical. The flag attaches to the cart end with magnets. It increases the size and uniformity of the cart end, serving as a reflector for the Motion Detector. It is compatible with both plastic and metal dynamics carts.
Ajoutez ce ventilateur modulaire au Dynamics Cart and Track System et au Go Direct® Sensor Cart pour fournir une force constante pour les expériences cinématiques et dynamiques. L'utilisation d'un ou de plusieurs ventilateurs sur un même chariot permet aux élèves d'étudier des expériences de cinématique et de dynamique avec accélération constante, masse variable, angle de poussée variable, poussée variable et durée variable en appuyant sur un bouton.
The Go Direct Sensor Cart Accessory Kit includes springs, magnets, masses, and replacement parts for the Go Direct Sensor Cart. The kit makes multiple-collision experiments possible, supporting impulse and momentum/energy conservation experiments, among others. Purchase one kit per lab station of one or two carts.
Heavy hoop spring bumper (1)
Light hoop spring bumper (1)
Magnet tabs (4)
Hook-and-pile tabs (2)
Masses (4)
Magnetic bumper (2)
Force sensor hook (3)
Rubber bumper (3)
Anti-roll peg (3)
After working hard to make our dynamics carts very low friction, we’ve added some friction back. Now you and your students can study friction in a controlled way.
Add a Friction Pad DTS to your Vernier Standard Cart, Plunger Cart, or Motion Encoder Cart, and watch the carts move under very consistent friction force. Setting the friction amount is as simple as turning a knob. Friction Pad DTS is not compatible with older metal dynamics carts.
These low-friction carts are designed to study motion and collisions on the Vernier Dynamics Track. The Plunger Cart has a spring-loaded plunger for collisions, including superelastic collisions. A top tray has inserts for attaching the Dual-Range Force Sensor, Low-g Accelerometer, and Wireless Dynamics Sensor System. Removable inserts allow rapid configuration of magnets or hook-and-pile tabs for collision study. Vernier carts are also compatible with other common carts and tracks.
What’s Included
Plunger cart
Mounting hardware for force sensor and accelerometer
Magnetic and hook-and-pile end caps
The Rod Clamp is used to attach one end of a Vernier Dynamics Track to a vertical ring stand rod. This configuration is most often used to create a ramp.
The Bumper and Launcher Kit contains accessories for experiments involving the Vernier Dual-Range Force Sensor (DFS-BTA), the Wireless Dynamics Sensor System (WDSS), and the Dynamics Cart and Track Systems (DTS / DS-EC). These accessories include two hoop springs of different stiffnesses, plus additional bumpers for elastic and inelastic collisions.
1 track bracket
1 dual-magnet bumper
1 DFS end mount screw
2 magnetic bumpers
2 rubber bumpers
2 hoop bumpers
2 clay holders
Clay (20g)
User manual
The Polarizer/Analyzer Set extends the Optics Expansion Kit to allow students to study polarization of light. Using a Rotary Motion Sensor to record analyzer angle, Malus's Law experiments are easy, detailed, and accurate.
The Polarizer/Analyzer Set includes a Fixed Polarizer, an Adjustable Analyzer, and an Adjustable Analyzer for Rotary Motion Sensor. Add to these the Light Source and Light Sensor Holder from the OEK, a Rotary Motion Sensor, and the Light Sensor for a complete system for studying polarization.
The Fixed Polarizer linearly polarizes the light from the Light Source.
The Adjustable Analyzer for Rotary Motion Sensor uses the Rotary Motion Sensor to record the angle of the analyzer. The Adjustable Analyzer can be placed after the Polarizer to study the curious behavior of stacks of three polarizers.
A Light Sensor measures the transmitted light intensity, allowing a simple Malus’s Law activity.
Polarizer passes vertically polarized light.
Adjustable Analyzer for Rotary Motion Sensor includes a mount for the Vernier Rotary Motion Sensor to record the analyzer angle.
Adjustable Analyzer includes an angle scale for manual reading of the polarizer angle.
Included:Adjustable Analyzer (1)Adjustable Analyzer for Rotary Motion Sensor (1)Mounting Screws for Rotary Motion Sensor (2)Belt for Rotary Motion Sensor (1)User manual
Le chariot à capteurs Go Direct est équipé de capteurs sans fil intégrés pour les expériences unidimensionnelles de dynamique et de cinématique. Il se connecte directement à votre plate-forme via la technologie sans fil Bluetooth®.
Description
Avec le chariot à capteurs Go Direct, les élèves peuvent explorer la force, la position, la vitesse et l'accélération directement sur leur appareil compatible Bluetooth, sans fil ni équipement supplémentaire. Chaque chariot est équipé de capteurs intégrés qui simplifient la mise en place de l'expérience et permettent de mener des investigations sur la piste ou en dehors.
Le chariot à capteurs Go Direct peut être utilisé pour des démonstrations pratiques de cinématique et de dynamique, mais il peut également être utilisé comme capteur individuel. Suspendez une masse et un ressort au capteur de force pour étudier le mouvement harmonique simple, ou fixez le chariot à un plateau tournant pour étudier l'accélération centripète.
Chaque chariot dynamique complet comprend
Roue codeuse pour indiquer la position
Accéléromètre 3 axes pour mesurer l'accélération indépendante
un capteur de force de ±50 N pour mesurer les poussées et les tractions
Plateaux de masse pour modifier la masse totale
Plongeur pour les études de collision et d'impulsion
Roues à faible frottement pour un mouvement uniforme
Inserts magnétiques et à crochets interchangeables pour les collisions élastiques et inélastiques
The Dynamics Cart and Track System with Motion Encoder is a revolutionary way for physics students to study dynamics. The Motion Encoder adds an optical position sensing system to record cart motion and eliminates the need for a motion detector for cart-on-track activities. Capture accurate, repeatable motion data with the Motion Encoder Cart and Receiver for sperior cart-on-track experiments. The Motion Encoder Cart replaces the ultrasonic Motion Detector when used for dynamics carton-on-track activities.
The Dynamics Cart and Track System with Motion Encoder allows students to explore kinematics, dynamics, momentum, and energy with the ease and precision of optical motion sensing. The Motion Encoder is an optical position sensing system that records cart motion and eliminates the need for a motion detector for cart-on-track activities. In addition to a Motion Encoder Cart and Receiver, this system includes an aluminum track, a low-friction plastic plunger cart, an ultra pulley, and all of the necessary attachment accessories.
The Dynamics Cart and Track System with Motin Encoder includes:
Combination 1.2 m Track/Optics Bench
Motion Encoder Cart with magnetic and hook-and-pile end caps
Motion Encoder Receiver
Plunger Cart with magnetic and hook-and-pile end caps
4 hexagonal masses, 125 g each
Mounting hardware for Dual-Range Force Sensor and accelerometers
Adjustable End Stop
2 Adjustable Two-Foot Levelers
Motion Detector Bracket
Motion Detector Reflector Flag
Rod Clamp
2 Photogate Brackets
Ultra Pulley
Pulley Bracket
User manual
The long-track version includes the same carts and accessories as the Dynamics Cart and Track System but substitutes a 2.2m Track for the 1.2m Track.
Shipping costs standard version:
The standard version 1.2m is sent as PostPac Economy bulky goods. The total shipping costs are CHF 31.00.
Shipping costs long version:
The long track version 2.2m is shipped by freight forwarding. The costs for shipping amount to a total of CHF 74.00.
&am
The Vernier Dynamics System Replacement Parts Kit includes most of the small parts, such as nuts, bolts, washers, and screws, for 5 Vernier Dynamics Systems.
What’s Included10 foam inserts – used to hold magnets in teardrop-shaped end plugs
5 teardrop-shaped end plugs, bolts, and nuts
10 T-bolts – for leveling feet and photogate brackets
10 Delrin® washers
10 ¼-20 nuts
5 Motion Detector thumb screws
5 plunger heads
10 anti-roll pegs
4 neodymium magnets
2 hex wrenches
10 hook-and-pile pieces – used for carts and end stops
The Fan Cart is a large fan on a light-weight cart. It offers students the ability to perform kinematics and dynamics experiments with constant acceleration, variable mass, variable thrust, and variable thrust angle.
The fan has three speeds for studying the effect of variable thrust. Two mass bars let you change the total mass of the cart to observe how mass affects acceleration. The fan turns on a protractor base, allowing the thrust to be directed at a known angle from the direction of travel. In this way students can ivestigate vector component applications.
A sail is included to perform the fan-on-a-sailboat experiment. The sail can be mounted in two positions to study the subtle effects of diverted airflow.
Although the cart can be used for qualitative experiments alone, most often it is used with a Motion Detector (MD-BTD) on a Dynamics Track (DTS).
Included:Fan CartMass bars (2)SailUser manual
The Fan Cart requires four AA batteries (not included).
The Dynamics Cart and Track System provides students with the tools they need to explore kinematics, dynamics, momentum, and energy. This versatile system can also be easily adapted to study optics, color, and diffraction.
The Dynamics and Track System is ideal for studying Newton's second law, acceleration on an inclined plane, conservation of momentum, and much more. This traditional cart and track system features an aluminum track, two low-friction, plastic carts, an ultra pulley, and all of the necessary attachment accessories. Easily attach sensors (sold separately) to carts or to the track for data collection, like a Motion Detector, Dual-Range Force Sensor, Wireless Dynamics Sensor System, Photogate, or an Accelerometer. Add the Vernier Optics Expansion Kit (OEK) and use the track as an optics bench.
The Dynamics Cart and Track Sytem includes:
Combination 1.2 m Track/Optics Bench
Standard Cart with magnetic and hook-and-pile end caps
Plunger Cart with magnetic and hook-and-pile end caps
4 hexagonal masses, 125 g each
Mounting hardware for Dual-Range Force Sensor and accelerometers
Adjustable End Stop
2 Adjustable Two-Foot Levelers
Motion Detector Bracket
Motion Detector Reflector Flag
Rod Clamp
2 Photogate Brackets
Ultra Pulley
Pulley Bracket
User manual
The long-track version includes the same carts and accessories as the Dynamics Cart and Track System but substitutes a 2.2m Track for the 1.2m Track.
Shipping costs standard version:
The standard version 1.2m is sent as PostPac Economy bulky goods. The total shipping costs are CHF 31.00.
Shipping costs long version:
The long track version 2.2m is shipped by freight forwarding. The costs for shipping amount to a total of CHF 74.00.
The Motion Encoder Cart and Receiver is for users of the Vernier Dynamics Cart and Track System (DTS) who want to add Motion Encoder capability. It includes a fully assembled Motion Encoder Cart (DTS-CART-MEC), as well as the Motion Encoder Receiver (MEC-BTD) and a Motion Encoder Long Track Strip (METS-LONG).
The Motion Encoder Long Track Strip can be trimmed to fit the 1.2 m dynamics track. This product is only compatible with Vernier Dynamics Cart and Track System.
Position resolution:1 mm
Maximum useful data rate:30 Hz
Included:Motion Encoder CartMotion Encoder ReceiverMotion Encoder Long Track StripAllen wrenchUser manual
The Motion Encoder Transmitter requires two AAA batteries (not included).
Replacement axles and wheels for the standard cart and plunger cart. Sold in pairs of two axles, each with two wheels permanently attached. Purchase this part to replace damaged wheels, axles, or bearings.
Le kit d’optique (OEK) contient 3 lentilles, une source lumineuse, un écran et des supports. Il permet notamment d’étudier les lentilles et la formation des images. Un kit miroir complète le kit optique et comprend un miroir convexe et un miroir concave.
Eddy current brakes are used as a braking system for high speed trains and roller coasters. Recreate this unusual braking system in your classroom or laboratory by installing our Eddy Current Brake into the end cap of a Go Direct Sensor Cart, Motion Encoder Cart, Standard Cart, or Plunger Cart. As the cart moves over the track, the magnets in the Eddy Current Brake create an electromagnetic drag on the cart that is proportional to the cart’s speed.
The Eddy Current Brake can be used in a variety of experiments:
Investigate the relationship between induced drag and the number of magnets and their position in the brake.
Compare the braking force created by the brake to that of our Friction Pad.
Note: The Eddy Current Brake is not compatible with our older metal dynamics carts that were part of the Vernier Dynamics Systems sold from 2005–2012.
Experiments in additive and subtractive color mixing can be easily and conveniently carried out using the Vernier Color Mixer Kit. The Color Mixer Kit consists of a three-color LED illuminator with power supply, a lens, and a double-sided screen. The intensity of the red, blue and green LEDs can be smoothly controlled from the light source.
For more optics experiments with the Dynamics Cart and Track System, see the Optics Expansion Kit (OEK).
The Color Mixer Kit requires a Vernier Track to serve as an optics bench. The Vernier Track is included with a Vernier Dynamics Cart and Track System.
User manual
The Mirror Set for Optics Expansion Kit includes a Half Screen, an adjustable Concave Mirror, and a fixed Convex Mirror. Use these parts with the Light Source and Screen on the Optics Expansion Kit and the track from the Vernier Dynamics System to observe and measure real and virtual images cast by mirrors.
With mirrors solidly mounted on a track acting as an optics bench, your students can quickly understand how images are formed and located.
The Track-to-Track Coupler rigidly connects two tracks for larger experiments and demonstrations. For use with Dynamics Cart and Track System Dynamics Cart and Track System with Go Direct® Sensor Cart
User Manual - T2T-VDS
79.50 CHF*
Ce site Web utilise des cookies pour garantir la meilleure expérience possible. Plus d'informations...