Anemometer

action-labq2-anm-bta-_environmental-science-_rachel-_lamont-001

action-ves-bta-ves-vl-anm-bta-labq2-lp-kw-awx-_environmental-science-_renewable-energy-_high-school-001

CHF 254.80*

Contenuto: 1 Stück

Prezzi incl. IVA più costi di spedizione

tempi di consegna: generalmente circa 3 settimane

Codice prodotto: ANM-BTA

Info sui prodotti "Anemometer"

Das Vernier-Anemometer ist ein Flügelrad-Anemometer, das Windgeschwindigkeiten von 0,5 bis 30 m/s misst. Das Anemometer passt in Ihre Hand und erlaubt somit Windmessungen im Freien. Mit der Standardvorrichtung zum Anbringen einer Kamera an der Rückseite und einem zusätzlichen Stab, können Sie den Windmesser in einem Windkanal anbringen oder vor Ventilatoren, um Experimente mit Windturbinen durchzuführen.

Bereich:
0,5 m/s ~ 30 m/s

Auflösung:
10-bit Auflösung (mit CBL2): 4,8 x 10-2 m/s
12-bit Auflösung (mit LabQuest, LabQuest Mini, LabPro, Go!Link, Easy Link): 1,2 x 10-2 m/s
13-bit Auflösung (mit SensorDAQ): 6,0 x 10-2 m/s

anm-bta-user-manual

Bildungsstufe:	Scuola media, Scuole medie superiori e professionali, Secundario II
DataLogger Schnittstellen:	Arduino, CBL2, EZ-LINK, GO-LINK, GO Wireless Link, LabCradle, LabPro, LabQuest, MINDSTORMS EV3, MINDSTORMS NXT, Raspberry Pi, SensorDAQ, TI Innovator
Fach:	Studio dell'ambiente, Vernier, Wetter, biologia, energia rinnovabile, fisica, geografia
Fachbereich:	Biologie, Natur, Mensch, Gesellschaft - NMG
Hersteller:	Vernier

0 di 0 valutazioni

Formula una valutazione!

Condividi le tue esperienze con il prodotto con altri clienti.

Login

Il tuo indirizzo e-mail

La tua password

Visualizza le valutazioni solo nella lingua corrente.

Nessuna recensione trovata Condividi le tue opinioni con gli altri.

Accessory Items

KidWind MINI Wind Turbine with Blade Design - Wind Turbine Only

Si tratta di una turbina facile da costruire che accende una lampadina LED e suona una melodia. Le pale altamente efficienti producono molta energia in un leggero vento.

CHF 112.10*

Vernier Energy Sensor

The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Setting up a circuit to study renewable energy systems such as wind turbines or solar panels is easy with the Vernier Energy Sensor. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load (VES-VL) or a resistor on Vernier Resistor Board (VES-RB) to the other side. The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output. Source Input Potential Range:± 30 V Source Input Current Range:± 1000 mA User manual

CHF 234.40*

KidWind Basic Wind Experiment Kit - Single Kit

Explore wind energy affordably and easily. This kit, one of our most popular, allows young scientists to test a variety of blade designs, generate electricity (0.5 –3 V range), and lift weights. The Basic Wind Experiment Kit has all the materials you need to get started understanding wind power. Great for classrooms, as well as individual science fair projects.

CHF 303.70*

Renewable Energy with Vernier - Print and E-Book

The Renewable Energy with Vernier lab book features 26 experiments in wind and solar energy. The lab book contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects, and more. In this book, students learn about renewable energy, experiment with variables affecting power output from model wind turbines and solar panels, and participate in engineering projects such as building a wind farm or a solar charger to meet certain design criteria. Aligned with the Next Generation Science Standards, NGSS, all of the experiments are designed to support students in three-dimensional learning with Disciplinary Core Ideas, Science and Engineering Practices, and Crosscutting Concepts identified for each experiment within the Instructor pages. Many of the experiments use the Vernier Energy Sensor and the Vernier Variable Load, two products that were designed to measure the power and energy output of renewable energy sources. The experiments also use the KidWind Advanced Wind Experiment Kits (KW-AWX) and Solar Thermal Exploration Kit (KW-STXK) .

CHF 120.20*

Similar Items

Relative Humidity Sensor

The Relative Humidity Sensor can be used for weather studies, monitoring greenhouses, or determining days when static electrical discharges could be a problem. The Relative Humidity Sensor contains an integrated circuit that can be used to monitor relative humidity over the range 0 to 95% (± 5%). These units are designed to be used with one of the interfaces sold by Vernier and are not standalone sensors. Range:0% to 95% Power:200 µA @ 5 VDC Typical Resolution:0.04% RH User manual

CHF 181.40*

Go Direct® Weather System - Go Direct Weather (sensor only)

Go Direct Weather ist ein erschwinglicher, kabelloser Handmesssensor zur Messung von Umgebungstemperatur, Luftfeuchtigkeit, Windgeschwindigkeit, Windchill, Taupunkt, barometrischem Druck und mehr. Wiederaufladbarer Akku - Bereit, wenn Sie sind Der robuste wiederaufladbare Akku bietet eine lange Akkulaufzeit und gewährleistet eine jederzeit betriebsbereite Verwendung des Sensors bei kabelloser Nutzung. Überwachen Sie die Akkulaufzeit direkt über unsere kostenlose Graphical Analysis™ 4-App oder LabQuest 2-App. Sollte der Akku zur Neige gehen, schliessen Sie den Sensor einfach an das Ladekabel an und sammeln Sie weiter Daten - ohne Unterbrechungen oder Unannehmlichkeiten für Sie oder Ihre Schüler:innen. Kabelgebunden oder kabellos - die Wahl liegt bei Ihnen Die Go Direct-Sensoren verbinden sich direkt mit Ihrem Mobilgerät, Chromebook™ oder Computer über unsere kostenlose Graphical Analysis™ 4-App - es sind keine zusätzlichen Geräte oder Softwarekäufe erforderlich. Go Direct-Sensoren können kabelgebunden über USB oder kabellos über Bluetooth® Wireless-Technologie verwendet werden, so dass Sie die für Ihr Klassenzimmer oder Labor beste Lösung wählen können.

CHF 364.90*

Go Direct™ Temperature Sensor

La sonda di temperatura Go Direct è un robusto sensore di temperatura per uso generale che gli studenti possono utilizzare per monitorare la temperatura. Si collega direttamente alla piattaforma in modalità wireless tramite Bluetooth® o via cavo tramite USB. La sonda di temperatura Go Direct, robusta e multiuso, offre agli studenti il vantaggio della connettività ovunque e ovunque si lavori. Essendo anche impermeabile, Go Direct Temperature è più durevole dei sensori che sono semplicemente resistenti all'acqua. A differenza di un termometro tradizionale, Go Direct Temperature consente agli studenti di raccogliere misure di temperatura in tempo reale di un singolo caso o di un periodo di tempo. L'intervallo di temperatura e la funzionalità wireless rendono Go Direct Temperature il sensore ideale per le applicazioni reali. La sonda Go Direct Temperature può essere utilizzata in una varietà di esperimenti: Condurre reazioni endotermiche ed esotermiche. Studiare il congelamento e la fusione dell'acqua. Misurare il contenuto energetico degli alimenti. Esaminare l'assorbimento dell'energia radiante. Monitorare le condizioni ambientali. Specifiche tecniche: Intervallo di temperatura: da -40 a 125°C Intervallo di temperatura di manipolazione: da -10 a 45°C Precisione: ±0,25°C Tempo di risposta (tempo per il 90% della lettura): 20 secondi (in acqua, con agitazione) Connessioni: Senza fili: Bluetooth Con cavo: USB Incluso: Sensore di temperatura Go Direct Cavo micro USB Guida rapida

CHF 161.00*