Anderes

Campionatore di profondità dell'acqua

Nessun groviglio di cavi con questo campionatore efficiente ed economico. Un unico cavo consente di prelevare un campione d'acqua da 1,5 litri da qualsiasi profondità in laghi, fiumi o stagni. Il design a flusso continuo consente un campionamento valido per misurare la temperatura e la qualità dell'acqua. È fornito un cavo da 14 metri.

CHF 262.90*

Vernier Resistor Board

The Vernier Resistor Board has seven 1 W 5% resistors mounted on a circuit board. Test clip holes on either side of the resistors allow for easy connections to clips on wire leads.The Vernier Resistor Board provides an ideal set of load resistors for KidWind wind turbines and solar panels. Resistor values: 10 Ω, 15 Ω, 20 Ω, 30 Ω, 39 Ω, 51 Ω, and 100 Ω Dimensions: 3.5 in long by 2 in wide Four insulated jumper wires fitted with mini-alligator clips included

CHF 38.70*

Sensor Adapter for NI myDAQ - Vernier

The Vernier myDAQ Adapter allows you to connect Vernier sensors to National Instruments’ myDAQ interface. The adapter includes two connectors for Vernier analog sensors and one connector for Vernier digital sensors. A screw terminal and header pins provide access to myDAQ lines not used by the connectors. This includes the two analog output lines, three digital lines (including the digital lines with the frequency and pulse width modulation outputs), and a +5 volt power terminal. The Vernier myDAQ Adapter board includes an optional external power port. This is designed to be used with Vernier’s LabQuest Power Supply (not included). You might consider using this external power supply if you want an easy way to provide more current to the +5 volt power terminal for building external circuits or to power a servo motor, for example. Easily connect the myDAQ platform to Vernier specialized sensors with this add-on board Access measurements from over 60 Vernier sensors (sold separately) Take advantage of connectors for two analog sensors and one digital sensor Download predefined software examples developed in LabVIEW

CHF 134.20*

Easy to Go! Adapter

This adapter allows an EasyTemp or EasyLink to be connected to a computer for data collection using Logger Pro or Logger Lite software. The adapter has a USB Mini-A receptacle that connects to the EasyTemp or EasyLink and a standard-A plug that connects to the computer. It can also be used with the USB cable that comes with the CBR 2. Connector 1: USB Mini Type A Receptacle Connector 2: USB Standard Type A Plug Note: Most consumer electronic devices use a USB Mini Type B plug, and will NOT WORK with this adapter. Our adapter only works for devices with USB Mini Type A plug. More Information

CHF 50.90*

Gas Pressure Sensor Bulb - 4 Pack

An affordable, latex- and phthalate-free accessory, the Gas Pressure Sensor Bulb is designed to be used with the Gas Pressure Sensor to easily perform grip strength measurements. For use with: Gas Pressure Sensor Go Direct™ Gas Pressure Sensor

CHF 50.90*

LabQuest® 4 GB SD Card

Easily add 4 GB of storage to your LabQuest or move files between LabQuests or a computer.

CHF 23.40*

Filtro