This completely wireless system simplifies experiment setup and allows basic experiments to be conducted with or without the track. Description The Dynamics Cart and Track System with Go Direct Sensor Cart includes essential laboratory equipment for teaching dynamics and kinematics. Using our Go Direct Sensor Cart, students can explore force, position, velocity, and acceleration directly on their Bluetooth®-enabled device—no wires or additional equipment required. Each cart features built-in sensors to simplify experiment setup and allow experiments to be conducted on or off the track. Specifications Position resolution: 0.25 mm, reported by default at 1 mm steps Force range: ±50 N Accelerometer range: ±160 m/s2 Track length: 1.2 m

Attaches to the end of the Vernier Dynamics Track to prevent the cart from leaving the track.

The Combination Dynamics Track and Optical Bench is aluminum and includes a metric scale. Extremely rigid, this 1.2 meter track will not sag under use. The track includes 2 Adjustable Two Foot Levelers.   Dieser Artikel wird mit PostPac Economy Sperrgut versendet. Die Kosten für den Versand sind insgesamt 31 CHF.

  Si monta sul nostro carrello; tramite manopola, è possibile regolare l’intensità della forza di attrito. 

Aggiungete questa ventola modulare al Dynamics Cart e al Track System e Go Direct® Sensor Cart per fornire una forza costante per gli esperimenti di cinematica e dinamica. L'utilizzo di uno o più ventilatori su un singolo carrello consente agli studenti di studiare cinematica e dinamica con accelerazione costante, massa variabile, angolo di spinta variabile, spinta variabile e durata variabile premendo un pulsante.

The Go Direct Sensor Cart Accessory Kit includes springs, magnets, masses, and replacement parts for the Go Direct Sensor Cart. The kit makes multiple-collision experiments possible, supporting impulse and momentum/energy conservation experiments, among others. Purchase one kit per lab station of one or two carts. Heavy hoop spring bumper (1) Light hoop spring bumper (1) Magnet tabs (4) Hook-and-pile tabs (2) Masses (4) Magnetic bumper (2) Force sensor hook (3) Rubber bumper (3) Anti-roll peg (3)

  Si monta sul nostro carrello; tramite manopola, è possibile regolare l’intensità della forza di attrito. 

These low-friction carts are designed to study motion and collisions on the Vernier Dynamics Track. The Plunger Cart has a spring-loaded plunger for collisions, including superelastic collisions. A top tray has inserts for attaching the Dual-Range Force Sensor, Low-g Accelerometer, and Wireless Dynamics Sensor System. Removable inserts allow rapid configuration of magnets or hook-and-pile tabs for collision study. Vernier carts are also compatible with other common carts and tracks. What’s Included Plunger cart Mounting hardware for force sensor and accelerometer Magnetic and hook-and-pile end caps

The Rod Clamp is used to attach one end of a Vernier Dynamics Track to a vertical ring stand rod. This configuration is most often used to create a ramp.

The Bumper and Launcher Kit contains accessories for experiments involving the Vernier Dual-Range Force Sensor (DFS-BTA), the Wireless Dynamics Sensor System (WDSS), and the Dynamics Cart and Track Systems (DTS / DS-EC). These accessories include two hoop springs of different stiffnesses, plus additional bumpers for elastic and inelastic collisions. 1 track bracket 1 dual-magnet bumper 1 DFS end mount screw 2 magnetic bumpers 2 rubber bumpers 2 hoop bumpers 2 clay holders Clay (20g) User manual

The Polarizer/Analyzer Set extends the Optics Expansion Kit to allow students to study polarization of light. Using a Rotary Motion Sensor to record analyzer angle, Malus's Law experiments are easy, detailed, and accurate. The Polarizer/Analyzer Set includes a Fixed Polarizer, an Adjustable Analyzer, and an Adjustable Analyzer for Rotary Motion Sensor. Add to these the Light Source and Light Sensor Holder from the OEK, a Rotary Motion Sensor, and the Light Sensor for a complete system for studying polarization. The Fixed Polarizer linearly polarizes the light from the Light Source. The Adjustable Analyzer for Rotary Motion Sensor uses the Rotary Motion Sensor to record the angle of the analyzer. The Adjustable Analyzer can be placed after the Polarizer to study the curious behavior of stacks of three polarizers. A Light Sensor measures the transmitted light intensity, allowing a simple Malus’s Law activity. Polarizer passes vertically polarized light. Adjustable Analyzer for Rotary Motion Sensor includes a mount for the Vernier Rotary Motion Sensor to record the analyzer angle. Adjustable Analyzer includes an angle scale for manual reading of the polarizer angle. Included:Adjustable Analyzer (1)Adjustable Analyzer for Rotary Motion Sensor (1)Mounting Screws for Rotary Motion Sensor (2)Belt for Rotary Motion Sensor (1)User manual

  Si monta sul nostro carrello; tramite manopola, è possibile regolare l’intensità della forza di attrito. 

Il carrello porta-sensori Go Direct è dotato di sensori wireless integrati per esperimenti di dinamica e cinematica monodimensionale. Si collega direttamente alla piattaforma in modalità wireless tramite la tecnologia wireless Bluetooth®. Descrizione Con il carrello dei sensori Go Direct, gli studenti possono esplorare forza, posizione, velocità e accelerazione direttamente sul loro dispositivo abilitato alla tecnologia Bluetooth, senza bisogno di fili o di altre apparecchiature. Ogni carrello è dotato di sensori integrati che semplificano l'impostazione dell'esperimento e consentono di condurre le indagini in pista o fuori pista. Il carrello dei sensori Go Direct può essere utilizzato per dimostrazioni pratiche di cinematica e dinamica, ma può anche essere usato come sensore individuale. Appendete una massa e una molla al sensore di forza per studiare il moto armonico semplice, oppure collegate il carrello a una piattaforma girevole per studiare l'accelerazione centripeta. Ogni carrello dinamico completo comprende Ruota encoder per la rilevazione della posizione accelerometro a 3 assi per misurare l'accelerazione indipendente Sensore di forza ±50 N per misurare spinte e trazioni Vassoi di massa per cambiare la massa totale Pistone per studi su collisioni e impulsi Ruote a basso attrito per un movimento uniforme Inserti magnetici e a gancio intercambiabili per collisioni elastiche e anelastiche

The Dynamics Cart and Track System with Motion Encoder is a revolutionary way for physics students to study dynamics. The Motion Encoder adds an optical position sensing system to record cart motion and eliminates the need for a motion detector for cart-on-track activities. Capture accurate, repeatable motion data with the Motion Encoder Cart and Receiver for sperior cart-on-track experiments. The Motion Encoder Cart replaces the ultrasonic Motion Detector when used for dynamics carton-on-track activities. The Dynamics Cart and Track System with Motion Encoder allows students to explore kinematics, dynamics, momentum, and energy with the ease and precision of optical motion sensing. The Motion Encoder is an optical position sensing system that records cart motion and eliminates the need for a motion detector for cart-on-track activities. In addition to a Motion Encoder Cart and Receiver, this system includes an aluminum track, a low-friction plastic plunger cart, an ultra pulley, and all of the necessary attachment accessories. The Dynamics Cart and Track System with Motin Encoder includes: Combination 1.2 m Track/Optics Bench Motion Encoder Cart with magnetic and hook-and-pile end caps Motion Encoder Receiver Plunger Cart with magnetic and hook-and-pile end caps 4 hexagonal masses, 125 g each Mounting hardware for Dual-Range Force Sensor and accelerometers Adjustable End Stop 2 Adjustable Two-Foot Levelers Motion Detector Bracket Motion Detector Reflector Flag Rod Clamp 2 Photogate Brackets Ultra Pulley Pulley Bracket User manual The long-track version includes the same carts and accessories as the Dynamics Cart and Track System but substitutes a 2.2m Track for the 1.2m Track. &am

The Vernier Dynamics System Replacement Parts Kit includes most of the small parts, such as nuts, bolts, washers, and screws, for 5 Vernier Dynamics Systems. What’s Included10 foam inserts – used to hold magnets in teardrop-shaped end plugs 5 teardrop-shaped end plugs, bolts, and nuts 10 T-bolts – for leveling feet and photogate brackets 10 Delrin® washers 10 ¼-20 nuts 5 Motion Detector thumb screws 5 plunger heads 10 anti-roll pegs 4 neodymium magnets 2 hex wrenches 10 hook-and-pile pieces – used for carts and end stops

The Fan Cart is a large fan on a light-weight cart. It offers students the ability to perform kinematics and dynamics experiments with constant acceleration, variable mass, variable thrust, and variable thrust angle. The fan has three speeds for studying the effect of variable thrust. Two mass bars let you change the total mass of the cart to observe how mass affects acceleration. The fan turns on a protractor base, allowing the thrust to be directed at a known angle from the direction of travel. In this way students can ivestigate vector component applications. A sail is included to perform the fan-on-a-sailboat experiment. The sail can be mounted in two positions to study the subtle effects of diverted airflow. Although the cart can be used for qualitative experiments alone, most often it is used with a Motion Detector (MD-BTD) on a Dynamics Track (DTS). Included:Fan CartMass bars (2)SailUser manual The Fan Cart requires four AA batteries (not included).

Questa nuova rotaia, in alluminio anodizzato e serigrafa- ta in cm e mm, è stata ridisegnata per aumentare le prestazioni del modello precedente; è sempre disponibile in due lunghezze da 1,2 m e da 2,2 m e dispone adesso di una ulteriore stringa a barre per l’utilizzo per il nuovo sistema encoder digitale; la struttura è molto rigida ed è scongiurato il pericolo delle flessioni durante l’uso. Ė possibile raddoppiare la lunghezza tramite un giunto di connessione ed una rotaia addizionale. I carrelli dinamici, di nuovo disegno, sono lo strumento perfetto per gli esperimenti di cinematica e dinamica; sono compatibili con i sensori di forza e di accelerazione, e possono essere montati sui carrelli stessi; sono facil- mente zavorrabili con quattro pesetti da montare lateralmen- te ed facile cambiare la configurazione velcro/magneti; il montaggio dei sensori è una operazione di grande sem- plicità. Fate andare su e giù il carrello per la Rotaia per studiarne il moto o usate due carrelli per analizzare la conservazione della quantità di moto in un urto. Grazie ad un attrito bassissimo con la rotaia, ottenuto tramite speciali cuscinetti a sfera, questi carrelli di eccezionale qualità permettono di ottenere dati di laboratorio privi di rumore e facilissimi da analizzare. Le estremità smonta- bili possono essere dotate di respingenti magnetici o di adesivi in velcro, rendendo i carrelli estremamente versa- tili. Uno dei due carrelli viene fornito con un respingente meccanico a molla che permette di effettuare esperimenti per lo studio di collisioni o “esplosioni” di carrelli. In questa rotaia è possibile montare una serie di acces- sori che permettono di effettuare esperimenti di base ed avanzati di ottica geometrica (vedere pagine seguenti). I sistemi combinati V-VDS (da 1,2 m) e V-VDSL (2,2 m) comprendono: Rotaia da 1,2 m o da 2,2 m, dotata di serigrafia con barre, utilizzabile anche per esperimenti di ottica e con possibilità di espansione con rilevamento ad encoder. Carrello standard con estremità rimovibili magnetiche e/o adesive con velcro, Carrello con respingente meccanico con estremità rimovibili magnetiche e/o adesive con velcro, Serie di 4 masse esagonali da 125 g, Coppia di piedini regolabili in altezza, Blocchi di fine corsa regolabili, Un supporto per sensore di posizione 2 supporti per fototraguardi, Supporti per sensori e fotocellule Fine corsa regolabile

The Motion Encoder Cart and Receiver is for users of the Vernier Dynamics Cart and Track System (DTS) who want to add Motion Encoder capability. It includes a fully assembled Motion Encoder Cart (DTS-CART-MEC), as well as the Motion Encoder Receiver (MEC-BTD) and a Motion Encoder Long Track Strip (METS-LONG). The Motion Encoder Long Track Strip can be trimmed to fit the 1.2 m dynamics track. This product is only compatible with Vernier Dynamics Cart and Track System. Position resolution:1 mm Maximum useful data rate:30 Hz Included:Motion Encoder CartMotion Encoder ReceiverMotion Encoder Long Track StripAllen wrenchUser manual The Motion Encoder Transmitter requires two AAA batteries (not included).

Replacement axles and wheels for the standard cart and plunger cart. Sold in pairs of two axles, each with two wheels permanently attached. Purchase this part to replace damaged wheels, axles, or bearings.

Add the Vernier Optics Expansion Kit to your Dynamics Cart and Track System to conduct optics experiments, such as image formation with lenses and light intensity vs. distance. You can even use the kit to build a basic telescope. The parts of the Optics Expansion Kit snap on to the track, so that the parts can be left in place while the track is moved. The three lenses are permanently mounted in three plastic supports. The light source is LED-based, so that it uses less energy and is cool to the touch. A rotating disc on the light source gives you the option of a radiant object, a point source, an “L” with 2 by 1 cm dimension, and parallel lines for resolution experiments. The power supply is the same as the LabQuest power supply. An additional aperture plate is included for experiments based on lens diameter and shape. For additive and subtractive color mixing experiments, check out the Color Mixer Kit. The Optics Expansion Kit requires a Vernier Track to serve as an optics bench. The Vernier Track is included with a Vernier Dynamics Cart and Track System. Optics Experiments Light and Distance Real Images and the Thin Lens Equation Virtual Images and the Telescope Aperture and Depth of Field Aperture, Light Intensity, and F-Stops Color Mixing (requires Color Mixer Kit, sold separately) Download all 6 experiments What’s Included Combination LED point and luminous light source with power supply Three lenses integrated with holders (100, 200, and —150 mm focal length) Screen and holder Light Sensor holder Aperture screen and holder Power supply

Eddy current brakes are used as a braking system for high speed trains and roller coasters. Recreate this unusual braking system in your classroom or laboratory by installing our Eddy Current Brake into the end cap of a Go Direct Sensor Cart, Motion Encoder Cart, Standard Cart, or Plunger Cart. As the cart moves over the track, the magnets in the Eddy Current Brake create an electromagnetic drag on the cart that is proportional to the cart’s speed.  The Eddy Current Brake can be used in a variety of experiments:  Investigate the relationship between induced drag and the number of magnets and their position in the brake. Compare the braking force created by the brake to that of our Friction Pad. Note: The Eddy Current Brake is not compatible with our older metal dynamics carts that were part of the Vernier Dynamics Systems sold from 2005–2012.

Experiments in additive and subtractive color mixing can be easily and conveniently carried out using the Vernier Color Mixer Kit. The Color Mixer Kit consists of a three-color LED illuminator with power supply, a lens, and a double-sided screen. The intensity of the red, blue and green LEDs can be smoothly controlled from the light source. For more optics experiments with the Dynamics Cart and Track System, see the Optics Expansion Kit (OEK). The Color Mixer Kit requires a Vernier Track to serve as an optics bench. The Vernier Track is included with a Vernier Dynamics Cart and Track System. User manual

The Mirror Set for Optics Expansion Kit includes a Half Screen, an adjustable Concave Mirror, and a fixed Convex Mirror. Use these parts with the Light Source and Screen on the Optics Expansion Kit and the track from the Vernier Dynamics System to observe and measure real and virtual images cast by mirrors. With mirrors solidly mounted on a track acting as an optics bench, your students can quickly understand how images are formed and located.

The Track-to-Track Coupler rigidly connects two tracks for larger experiments and demonstrations. For use with Dynamics Cart and Track System Dynamics Cart and Track System with Go Direct® Sensor Cart User Manual - T2T-VDS