Go Direct® Tester Strutture & Materiali

Designed to collect data on forces developed during stepping, jumping, and other human-scale actions. Designed for much higher forces than the Dual-Range Force Sensor, the Force Plate can measure the forces developed during stepping, jumping, and other human-scale actions. For example, you can perform the following kinds of experiments: Observe the change in normal force during an elevator ride. Measure the impulse delivered by the floor during a jump. Measure the reaction force as a student leans against a wall. Force range:–850 to +3500 N or –200 to +850 N, where positive value is a compression force Typical Resolution:1.2 N or 0.3 N User manual

The Go Direct Force and Acceleration Sensor couples a 3-axis accelerometer with a stable and accurate force sensor that measures forces as small as ±0.1 N and up to ±50 N. Measure pushes and pulls in the classroom or outdoors. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. The Go Direct Force and Acceleration Sensor includes a force sensor, 3-axis accelerometer, and 3-axis gyroscope. Take it on a roller coaster, swing, or slide. Suspend several Go Direct Force and Acceleration Sensors from the ceiling to perform a 3-D vector force experiment, or attach a string to the hook and whirl it in a horizontal or vertical circle. In wireless mode, your imagination is the only limiting factor! Go Direct Force and Acceleration can be used in a variety of experiments: Investigate Newton’s Third Law by connecting the hooks of two force sensors with a rubber band. Use the force sensor to pull an object across a surface to measure frictional forces. Attach the force sensor to the Centripetal Force Apparatus to measure centripetal force and acceleration simultaneously. Place sensors on Dynamics Carts to investigate forces and accelerations in collisions. Specifications: Force: ±50 N Acceleration: 3 axis, ±16 g Gyroscope: 3 axis, 2000°/s Connections: Wireless: Bluetooth Wired: USB Icluded: Go Direct Force and Acceleration Sensor Hook Bumper Nylon screw Accessory rod Micro USB Cable

Use the Dual-Range Force Sensor in a wide variety of experiments, including the study of friction, simple harmonic motion, impact in collisions, or centripetal force. The Dual-Range Force Sensor is a general-purpose sensor for measuring pushing and pulling forces. Two ranges allow you to measure forces as small as 0.01 newtons and as large as 50 newtons. It can be used in a broad range of ways: As a replacement for a hand-held spring scale Mounted horizontally on a dynamics cart to study collisions Mounted on a ring-stand to measure forces in a vertical direction Collect data from two Force Sensors simultaneously to study Newton’s Third Law ± 10 N Range Resolution: 0.01 N ± 50 N Range Resolution: 0.05 N user manual

The Go Direct Melt Station accurately determines the melting temperature of solid substances. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. Teach students the visual detection capillary method of melting point determination with the Go Direct Melt Station. It accurately measures melting temperatures of a solid (up to 260°C), and the real-time graphing provides a unique perspective of the melting process. The wide-angle observation and magnification window, LED-lit heater block, and adjustable tilt base give students a clear view of the substance as they witness the state change. Internal cooling fans reduce the waiting time between sample testing. Also included is an important safety feature that automatically powers down the heating block after 60 minutes with no change to the control knob. The Go Direct Melt Station can be used in a variety of experiments: Determine the melting temperature of an known organic solid such as aspirin, ibuprofen, or caffeine. Identify an unknown organic solid by its melting temperature. Use melting temperature to analyze reaction products. Specifications: Dimensions: Base: 13 cm × 15 cm × 1.5 cm Body: 9 cm × 9 cm × 24 cm Weight: 1.0 kg (2.2 lbs) Range: Ambient to 260°C Safety shut down: The heating block is automatically powered down after approximately 60 minutes of heating. Capillary tubes: 1.4–1.8 mm outside diameter, 100 mm length Capillary tube slots: 3 Viewing lens: 27 mm diameter (functional), 30 mm (actual) Lighting of capillary slots: 3 white LEDs Lighting of control dial: Red LED (indicates heating mode) Blue LED (indicates cooling mode with cooling fan running) Yellow LED (safety shut off activated) Connections: Wireless: Bluetooth Wired: USB Included: Go Direct Melt Station 100 standard capillary tubes Power supply Micro USB Cable