Advanced Physics with Vernier — Beyond Mechanics - Print and E-Book

This inductor is used in many physics experiments, including some in our Advanced Physics with Vernier – Beyond Mechanics book. It is an air-core inductor is made from 20 gauge copper wire. It has an inductance of 5 mH and a resistance of 2.4 ohms. It is rated at 200 Watts. A metal core (included) can be added to increase inductance. For RL or RLC circuit experiments, we recommend using this inductor in combination with our Vernier Circuit Board. The ends of the coil wire are exposed so that you can easily make connections to the Vernier Circuit Board or to other components or sensors.

Mit Hilfe der zweiten Experimentierplatine von Vernier kann mit einfachen elektrischen Schaltkreisen experimentiert werden. Die Platine ist bestückt mit Kondensatoren, Widerständen, einer LED, Schaltern, Batteriehaltern, einem Anschluss für die externe Spannungsversorgung, einer selbstrückstellenden Sicherung, Lämpchensockeln, Anschlussmöglichkeiten für weitere Bauteile und Anschlusspins, die den Anschluss von Krokodilklemmen vereinfachen. Description The Vernier Circuit Board 2 is a basic electricity lab on a board. The turret terminals for every component make it easy to connect basic series and parallel circuits, examine the behavior of different components, and investigate RLC circuits. The Vernier Circuit Board 2 includes 10 bulbs, a resettable fuse, three powering options, 10 alligator clip leads, terminal clips to add your own components, and pre-installed components. Installed Components R1 and R2–10 Ω resistors rated at 5 W R3 and R4–51 Ω resistors rated at 2 W R5 and R6–68 Ω resistors rated at 2 W R7–22 kΩ resistor rated at 1 W R8–47 kΩ resistor rated at 1 W R9–100 kΩ resistor rated at 1 W R11–4.7 kΩ resistor rated at 1 W C1–1 µF non-polar capacitor C2–10 µF non-polar capacitor 3 E-10 lamp sockets LED and 220 Ω current limiting resistor L1–5 mH inductor, with powdered iron core in a clip 1 kΩ linear potentiometer 85 dB buzzer SW2–single-pole, double-throw (SPDT) switch SW3–single-pole, single-throw (SPST) momentary switch The Vernier Circuit Board 2 can be used interchangeably with the Vernier Circuit Board in experiments included in Physics with Vernier and Advanced Physics with Vernier–Beyond Mechanics. Specifications Size: 10 in. x 6.5 in. (25.5 cm x 16.5 cm) Mass: ~0.44 kg Optional power sources: up to 4 AA batteries, not included LabQuest Power Supply, not included (or other 5 VDC adapter with center-positive ⅛ inch connector) DC power supply Vernier Power Amplifier Maximum voltage: 10 V Resettable fuse opens at 0.8 A, but 0.3 A or less is recommended All parts ROHS compliant What’s Included One circuit board Ten insulated jumper wires fitted with mini-alligator clips Five #48 lamps rated 0.06 A at 2.0 V (cylindrical body) Five #50 lamps rated 0.220 A at 7.5 V (round body)

Use this set of rods with the Instrumentation Amplifier and the Current Probe to investigate electrical resistance as a function of conductor length, diameter, and material. This lab is featured in our Advanced Physics with Vernier - Beyond Mechanics lab manual. The kit includes four brass rods with different diameters and four other metal rods that have the same diameter as one of the brass rods. Each rod is 46 cm long. TYPEDIAMETERLENGTH Brass 2.38 mm (3/32″) 46 cm 3.18 mm (1/8″) 3.97 mm (5/32″) 4.76 mm (3/16″) Stainless Steel 3.18 mm (1/8″) Music Wire Aluminum Copper