Passer au contenu principal Passer à la recherche Passer à la navigation principale

leXsolar-Wind Large 2.0

Informations sur le produit "leXsolar-Wind Large 2.0"

Mit diesem System bleiben keine Fragen zu den physikalischen Grundlagen der Windenergienutzung offen. leXsolar-Wind Large vermittelt durch lehrplanbezogene Experimente ein Verständnis für die Funktionsweise von Windkraftanlagen. So kann beispielsweise der Einfluss von Windstärke und Windrichtung oder der Rotorart untersucht werden. Für die Klassenstufe 5 - 7 können die Versuche phänomenologisch anhand einfacher Verbraucher wie Glühlampe oder Hupe durchgeführt werden, für den Physikunterricht bis Klasse 13 auch vollständig quantitativ. Für die phänomenologischen Versuche ist die Erweiterung "Messen ohne Messgeräte" erforderlich.

Stückliste:

  • 1 x 1100-19 leXsolar-Grundeinheit groß 
  • 1 x 1100-22 Widerstandsmodul 
  • 1 x 1100-23 Potentiometermodul 
  • 1 x 1400-01 Savoniusrotormodul 
  • 1 x 1400-07 Kondensatormodul 220 mF, 2.5 V 
  • 1 x 1400-08 LED-Modul 2mA, rot 
  • 1 x 1400-12 leXsolar-Windrotoren 
  • 1 x 1400-19 leXsolar-Winderzeuger 
  • 1 x 1400-22 leXsolar-Windturbinenmodul 
  • 1 x 1404-02 Box 1404 
  • 1 x L3-01-013 Deckel für Box 
  • 1 x L3-01-023 Einlage Wind Large 1404 
  • 1 x L3-03-016 leXsolar-CD 
  • 1 x L3-03-132 Einräumplan 1404 Wind Large 
  • 1 x L3-03-220 Anleitung Handhabung Fingerschutz 

zusätzlich benötigte Produkte:

  • 1 x 9100-03 AV-Modul 
  • 1 x 9100-05 PowerModul 
  • 2 x L2-06-012 Messleitung 25cm, schwarz 
  • 2 x L2-06-013 Messleitung 25cm, rot 

 

Experimente

  • Einfluss der Windgeschwindigkeit auf eine Windturbine (qualitativ und quantitativ)
  • Ermittlung und Vergleich der Anlaufgeschwindigkeit von Windkraftanlagen und Savoniusrotor
  • Veränderung der Generatorspannung durch Zuschalten von Verbrauchern
  • Untersuchung der Windgeschwindigkeit hinter dem Rotor
  • Energiebilanz einer Windkraftanlage
  • Experimentelle Berechnung des Wirkungsgrades einer Windkraftanlage
  • Speicherung elektrischer Energie
  • Energieumwandlung an einer Windkraftanlage
  • Untersuchung von Farbscheiben mit Hilfe einer Windkraftanlage
  • Vergleich zwischen Savonius- und Dreiblattrotor (qualitativ und quantitativ)
  • Vergleich von Zwei-, Drei- und Vierblattrotoren (qualitativ und quantitativ)
  • Kennlinie einer Windkraftanlage
  • Einfluss der Windrichtung (qualitativ und quantitativ)
  • Einfluss des Anstellwinkels der Rotorblätter (qualitativ und quantitativ)
  • Die Abhängigkeit der Anlaufgeschwindigkeit vom Anstellwinkel
  • Einfluss der Flügelform (qualitativ und quantitativ)

Bildungsstufe: Sec. II & tertiaire, Secondaire II, cycle 2
Fach: Wetter, physique, énergie renouvelable
Fachbereich: Bildung für nachhaltige Entwicklung - BNE, Medien & Informatik - M&I, Natur, Mensch, Gesellschaft - NMG, Physik, fächerübergreifend
langue: Allemand, anglais

0 sur 0 évaluations

Note moyenne de 0 sur 5 étoiles

Laissez une évaluation !

Partagez avec d'autres clients votre avis sur le produit.


Ignorer la galerie de produits

Accessory Items

Anemometer
Das Vernier-Anemometer ist ein Flügelrad-Anemometer, das Windgeschwindigkeiten von 0,5 bis 30 m/s misst. Das Anemometer passt in Ihre Hand und erlaubt somit Windmessungen im Freien. Mit der Standardvorrichtung zum Anbringen einer Kamera an der Rückseite und einem zusätzlichen Stab, können Sie den Windmesser in einem Windkanal anbringen oder vor Ventilatoren, um Experimente mit Windturbinen durchzuführen.  Bereich:0,5 m/s ~ 30 m/s Auflösung: 10-bit Auflösung (mit CBL2): 4,8 x 10-2 m/s 12-bit Auflösung (mit LabQuest, LabQuest Mini, LabPro, Go!Link, Easy Link): 1,2 x 10-2 m/s 13-bit Auflösung (mit SensorDAQ): 6,0 x 10-2 m/s anm-bta-user-manual

254.80 CHF*
Vernier Energy Sensor
The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits. Setting up a circuit to study renewable energy systems such as wind turbines or solar panels is easy with the Vernier Energy Sensor. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load (VES-VL) or a resistor on Vernier Resistor Board (VES-RB) to the other side. The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output. Source Input Potential Range:± 30 V Source Input Current Range:± 1000 mA User manual

234.40 CHF*
Ignorer la galerie de produits

Similar Items

KidWind Advanced Wind Experiment Kit - Single Kit
Perform all of the same investigations as the Basic Wind Experiment Kit with the ability to generate more power at higher voltages ( 0.5 V–20 V).  Discover advanced concepts of wind turbine technology, including es and generator construction (with the GenPack add-on). Students can use the blades they design to generate electricity, lift weights, and pump water. This kit is perfect for grades 7–12 and college. All you need to add is a wind source, basic tools, and imagination!

385.30 CHF*
Renewable Energy with Vernier - Print and E-Book
The Renewable Energy with Vernier lab book features 26 experiments in wind and solar energy. The lab book contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects, and more. In this book, students learn about renewable energy, experiment with variables affecting power output from model wind turbines and solar panels, and participate in engineering projects such as building a wind farm or a solar charger to meet certain design criteria. Aligned with the Next Generation Science Standards, NGSS, all of the experiments are designed to support students in three-dimensional learning with Disciplinary Core Ideas, Science and Engineering Practices, and Crosscutting Concepts identified for each experiment within the Instructor pages. Many of the experiments use the Vernier Energy Sensor and the Vernier Variable Load, two products that were designed to measure the power and energy output of renewable energy sources. The experiments also use the KidWind Advanced Wind Experiment Kits (KW-AWX) and Solar Thermal Exploration Kit (KW-STXK) .

120.20 CHF*
Go Direct® Energy Sensor
Description Simpler to use than a multimeter, the Go Direct Energy Sensor measures the voltage and current oputput of a renewable energy system. Connect a source, such as a small wind turbine or solar panel, and our free Graphical Analysis 4 app displays voltage, current, power, and energy output. For simple energy measurements, Go Direct Energy includes a fixed load of 30 Ω. For more advanced experiments, electrical contacts are built into the sensor to connect to an external load, such as the Variable Load, a resistor on Vernier Resistor Board, a water pump, or lights. The Go Direct Energy Sensor is ideal for a wide variety of renewable energy experiments:  Investigate the electrical energy generated by a wind turbine or solar panel. Explore the effect of load on wind turbine or solar panel output. Test blade design variables and evaluate data to determine optimal blade design. Rechargeable Battery—Ready When You Are The robust rechargeable battery offers long battery life and provides always-ready operation when using the sensor wirelessly. Monitor battery life directly from our free Graphical Analysis™ 4 app or LabQuest 2 App. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students. Wired or Wireless—The Flexibility to Choose Our Go Direct sensors connect directly to your mobile device, Chromebook™, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth® wireless technology, allowing you to choose the solution best for your classroom or laboratory.

222.20 CHF*
KidWind MINI Wind Turbine with Blade Design - Wind Turbine Only
Il s'agit d'une turbine facile à construire qui allume une ampoule à DEL et joue un air. Les pales très efficaces produisent beaucoup de puissance dans un léger vent.

112.10 CHF*
Éolienne KidWind MINI avec conception de lames
La mini éolienne KidWind avec conception de pales permet aux élèves d'explorer les concepts de base de production d'énergie éolienne et de conception de pales comme le pas, la surface, la masse, la quantité et le matériau sur un bureau à l'aide d'un petit ventilateur de maison. Cette trousse est la trousse recommandée pour Investigating Wind Energy. La mini éolienne KidWind est une éolienne simple et facile à construire dotée d'un ensemble de pales efficace et de conception optimale qui permet d'allumer une ampoule LED à l'aide d'un petit ventilateur de maison.

152.90 CHF*