Digital Laboratory Power Supply, 0 - 15 V/0 - 3 A DC
CHF 508.40*
Contenuto:
1 Stück
tempi di consegna: generalmente circa 3 settimane
Codice prodotto:
FGEN-PAMP-INTL
Info sui prodotti "Digital Laboratory Power Supply, 0 - 15 V/0 - 3 A DC"
This power supply in modern design constructed especially for the service centers and education fields. The 16 mm LCD displays allow the user to read the fixed values very fast, precise and the outputs for constant voltage and current are continously adjustable.
- Short-circuit and overload protected
- 16mm LCD with backlight
- 4 mm safety jacks
- Fan-free case design
- Safety: EN-61010-1
- Safety Transformer: EN-61558-2-6
- Accessories: power cable and manual
| Bildungsstufe: | Scuola media, Scuole medie superiori e professionali, Secundario II |
|---|---|
| Fach: | Robotica, fisica |
| Fachbereich: | Natur, Mensch, Gesellschaft - NMG, Physik |
Login
Salta la galleria dei prodotti
Accessory Items
Breadboard per sperimentazioni V-VCB2
CHF 324.10*
La nuova breadbord Vernier Circuit Board 2 è un piccolo laboratorio di elettricità di base. I terminali, a torretta per ogni componente, rendono i collega- menti semplici per applicazioni sia in serie che in parallelo, è inoltre possibile esaminare il comportamento di diversi componenti e/o circuiti RLC.
La nuova breadboard2 comprende:10 lampadine, un fusibile ripristinabile, tre opzioni di alimentazione, 10 cavi con pinze a coccodrillo, pinze terminali per aggiungere i propri componenti e componenti pre-installati.
Tensione massima: 10 VAlimentazione: fino a 4 batterie AA (non incluse)oppure Alimentatore LabQuest (non incluso) o altro adattatore 5 VDC Dimensioni: 25,5 x 16,5 cm - Peso: ~ 0,44 kg
Fusibile ripristinabile apre a 0,8 A ma è raccomandato 0,3 A o meno. Incluso nella fornitura:Una scheda a circuito, dieci ponticelli isolati dotati di mini pinze a coccodrillo e una serie di lampadine a 2 V e a 7,5 V
Specifications
Size: 10 in. x 6.5 in. (25.5 cm x 16.5 cm)
Mass: ~0.44 kg
Optional power sources:
up to 4 AA batteries, not included
LabQuest Power Supply, not included (or other 5 VDC adapter with center-positive ⅛ inch connector)
DC power supply
Vernier Power Amplifier
Maximum voltage: 10 V
Resettable fuse opens at 0.8 A, but 0.3 A or less is recommended
All parts ROHS compliant
Power Amplifier
CHF 609.50*
Use a Power Amplifier to drive a variety of loads, including speakers, lamps, small DC motors, and RLC circuits. The Power Amplifier can produce DC, sine, square, triangle, and sawtooth waveforms.
The Power Amplifier allows you to drive loads with ±10 V and up to 1 A current.
Utilizes internal feedback for accurate AC waveforms and DC levels.
Can provide a steady, linearly-controlled DC output for driving loads like DC motors, and precise AC waveforms for driving things like speakers.
Current-limited to protect against overload and shorting.
Current monitor function allows you to log real-time load current with any Vernier interface.
Class A-B Push-Pull Amplifier provides low distortion with good efficiency.
Supports LabQuest as a standalone device or a computer with Logger Pro 3.8 or newer and a LabQuest, LabPro, or SensorDAQ interface.
Important Note:The Power Amplifier creates no signal on its own. It depends on a signal source such as a LabQuest 2, Original LabQuest, LabPro, or other signal source. LabQuest Mini does not provide a signal source.
Frequency range:DC to 15 kHz.
Overall gain:10X
Input impedance:10 kΩ.
Included:Vernier Power AmplifierPower supply3.5 mm audio cable for LabQuest controlBTA cable for LabPro input and current sensingUser manual