Power Amplifier

CHF 609.50*

Contenuto: 1 Stück

Prezzi incl. IVA più costi di spedizione

tempi di consegna: generalmente circa 3 settimane

Codice prodotto: PAMP-EURO

Info sui prodotti "Power Amplifier"

Use a Power Amplifier to drive a variety of loads, including speakers, lamps, small DC motors, and RLC circuits. The Power Amplifier can produce DC, sine, square, triangle, and sawtooth waveforms.

The Power Amplifier allows you to drive loads with ±10 V and up to 1 A current.

Utilizes internal feedback for accurate AC waveforms and DC levels.
Can provide a steady, linearly-controlled DC output for driving loads like DC motors, and precise AC waveforms for driving things like speakers.
Current-limited to protect against overload and shorting.
Current monitor function allows you to log real-time load current with any Vernier interface.
Class A-B Push-Pull Amplifier provides low distortion with good efficiency.
Supports LabQuest as a standalone device or a computer with Logger Pro 3.8 or newer and a LabQuest, LabPro, or SensorDAQ interface.

Important Note:
The Power Amplifier creates no signal on its own. It depends on a signal source such as a LabQuest 2, Original LabQuest, LabPro, or other signal source. LabQuest Mini does not provide a signal source.

Frequency range:
DC to 15 kHz.

Overall gain:
10X

Input impedance:
10 kΩ.

Included:
Vernier Power Amplifier
Power supply
3.5 mm audio cable for LabQuest control
BTA cable for LabPro input and current sensing
User manual

Bildungsstufe:	Scuole medie superiori e professionali
Fach:	Vernier, fisica

0 di 0 valutazioni

Formula una valutazione!

Condividi le tue esperienze con il prodotto con altri clienti.

Login

Il tuo indirizzo e-mail

La tua password

Visualizza le valutazioni solo nella lingua corrente.

Nessuna recensione trovata Condividi le tue opinioni con gli altri.

Accessory Items

Amplificatore di potenza Accessori Speaker

Questo kit comprende un altoparlante e gli accessori utilizzati con l'amplificatore di potenza Vernier per studiare le onde meccaniche e le molle. L'altoparlante contiene un disco metallico leggero incollato al cono dell'altoparlante. Un palo di trasmissione fissato alla piastra metallica permette di azionare materiali elastici come corde e molle.

CHF 364.90*

Go Direct™ Voltage Probe

The Go Direct Voltage Probe combines a wide input voltage range and high precision, making it an excellent choice for lab investigations of both AC/DC circuits and electromagnetism. Use this differential probe to measure the voltage in simple circuits, to study basic principles of electrochemical cells, or to investigate the resistivity of different metals. With a range of ±15 V, this system is ideal for use in “battery and bulb” circuits. Go Direct Voltage is capable of kHz sampling and mV resolution, so you can also use it to capture more difficult electric potentials, such as the electromagnetic field induced in a coil by a moving magnet. This single sensor can take the place of several voltmeters in your classroom. The Go Direct Voltage Probe can be used in a variety of experiments: Measure potential difference at various places in series and parallel circuits. Investigate Ohm’s law in simple circuits. Measure the voltage across a capacitor in RC and RLC circuits. Explore Faraday’s law and induced EMFs in a coil of wire. Specification: Input voltage range: ±15.0 V Maximum voltage on any input: ±15 V Typical resolution: 0.5 mV Power: Internal rechargeable battery or USB connection Connections: Wireless: Bluetooth Wired: USB Included: Go Direct Voltage Probe Micro USB Cable

CHF 201.80*

Springs Set

This accessory kit contains 6 springs that are ideal for physics experiments. The springs are 6 cm long and 0.8 cm in diameter. Three springs have a spring constant of 5 N/m and the other three have a spring constant of 15 N/m.

CHF 38.70*

Breadboard per sperimentazioni V-VCB2

La nuova breadbord Vernier Circuit Board 2 è un piccolo laboratorio di elettricità di base. I terminali, a torretta per ogni componente, rendono i collega- menti semplici per applicazioni sia in serie che in parallelo, è inoltre possibile esaminare il comportamento di diversi componenti e/o circuiti RLC. La nuova breadboard2 comprende:10 lampadine, un fusibile ripristinabile, tre opzioni di alimentazione, 10 cavi con pinze a coccodrillo, pinze terminali per aggiungere i propri componenti e componenti pre-installati. Tensione massima: 10 VAlimentazione: fino a 4 batterie AA (non incluse)oppure Alimentatore LabQuest (non incluso) o altro adattatore 5 VDC Dimensioni: 25,5 x 16,5 cm - Peso: ~ 0,44 kg Fusibile ripristinabile apre a 0,8 A ma è raccomandato 0,3 A o meno. Incluso nella fornitura:Una scheda a circuito, dieci ponticelli isolati dotati di mini pinze a coccodrillo e una serie di lampadine a 2 V e a 7,5 V Specifications Size: 10 in. x 6.5 in. (25.5 cm x 16.5 cm) Mass: ~0.44 kg Optional power sources: up to 4 AA batteries, not included LabQuest Power Supply, not included (or other 5 VDC adapter with center-positive ⅛ inch connector) DC power supply Vernier Power Amplifier Maximum voltage: 10 V Resettable fuse opens at 0.8 A, but 0.3 A or less is recommended All parts ROHS compliant

CHF 324.10*

Digital Laboratory Power Supply, 0 - 15 V/0 - 3 A DC

This power supply in modern design constructed especially for the service centers and education fields. The 16 mm LCD displays allow the user to read the fixed values very fast, precise and the outputs for constant voltage and current are continously adjustable. Short-circuit and overload protected 16mm LCD with backlight 4 mm safety jacks Fan-free case design Safety: EN-61010-1 Safety Transformer: EN-61558-2-6 Accessories: power cable and manual

CHF 508.40*