Stainless Steel Temperature Probe

CHF 87.60*

Contenuto: 1 Stück

Prezzi incl. IVA più costi di spedizione

tempi di consegna: generalmente circa 3 settimane

Codice prodotto: TMP-BTA

Info sui prodotti "Stainless Steel Temperature Probe"

The Stainless Steel Temperature Probe is a rugged, general-purpose temperature sensor that can be used in organic liquids, salt solutions, acids, and bases. Use it as you would use a thermometer for experiments in chemistry, physics, biology, Earth science, and environmental science.

Temperature range:
–40 to 135°C (–40 to 275°F)

Typical Resolution:
0.17°C (–40 to 0°C)
0.03°C (0 to 40°C)
0.1°C (40 to 100°C)
0.25°C (100 to 135°C)

Accuracy:
±0.2°C at 0°C
±0.5°C at 100°C

User manual

Bildungsstufe:	Scuola elementare, Scuola media, Scuole medie superiori e professionali, Secundario II
Fach:	Studio dell'ambiente, Vernier, Wetter, biologia, chimica, energia rinnovabile, fisica, geografia, qualità dell'acqua
Fachbereich:	Biologie, Chemie, Natur, Mensch, Gesellschaft - NMG, Physik

0 di 0 valutazioni

Formula una valutazione!

Condividi le tue esperienze con il prodotto con altri clienti.

Login

Il tuo indirizzo e-mail

La tua password

Visualizza le valutazioni solo nella lingua corrente.

Nessuna recensione trovata Condividi le tue opinioni con gli altri.

Accessory Items

Electrode Support

The Vernier Electrode Support connects to all standard ring-stand posts to keep sensors firmly in place during an experiment. The Electrode Support is a great complement to the Vernier Stir Station, as well as a perfect holder for many sensors. It is built to connect to all standard ring-stand posts; its large-handled locking nut keeps your sensors firmly in place. The larger opening (13 mm in diameter) is perfect for our pH, ISE, Conductivity and ORP sensors. The smaller opening (5 mm) is designed to hold our Stainless Steel Temperature Probe or the Vernier Go!Temp. The clamp end makes connecting to ring stands easy, accommodating post diameters between ~0.5 and 1 cm. The grooves on the Electrode Support to hold the wire leads for electroplating or electrolysis experiments.

CHF 20.30*

Similar Items

Thermocouple

A simple and rugged sensor designed to measure temperature in the range of –200ºC to 1400ºC. Low cost and a wide temperature range make the Thermocouple an economical, versatile temperature sensor. This sensor uses type-K thermocouple wire to and can be used to measure flame temperatures as high as 1400˚C, or liquid nitrogen temperatures at -196˚C. The Thermocouple has an internal ice-point compensation chip, so you do not need to place a reference wire in an ice-water bath. You can simply use one measuring lead to take temperature readings. Each Thermocouple is individually calibrated. Typical Accuracy:0ºC to 900ºC: ±2.2º–200ºC to 0ºC: ±5ºC900ºC to 1400ºC: ±15ºC Typical Resolution:0.40ºC User manual

CHF 285.40*

Type-K Thermocouple Wire

Replacement wire for Vernier Thermocouple.

CHF 38.70*

Go!Temp - Single Sensor

Collect temperature data directly through the USB port of a computer. We’ve made it easy to use technology to teach science concepts with Go!Temp. Plug Go!Temp directly into your computer or Chromebook USB port to start collecting real-time temperature data. Range:-20°C – 115°C Maximum temperature that the sensor can tolerate without damage:150°C Resolution:0.07°C Accuracy:± 0.5°C Response Time:4s (to 90% of full reading in water) User manual

CHF 112.10*

Extra-Long Temperature Probe

This probe is designed for outdoor temperature sensing or for measuring temperature at various depths in lakes and streams. It has a 30 m (100 ft) cable. Range:–50˚C to 150˚C Typical Accuracy:±0.2°C Typical Resolution:0.07°C User manual

CHF 234.40*

Go Direct™ Temperature Sensor

La sonda di temperatura Go Direct è un robusto sensore di temperatura per uso generale che gli studenti possono utilizzare per monitorare la temperatura. Si collega direttamente alla piattaforma in modalità wireless tramite Bluetooth® o via cavo tramite USB. La sonda di temperatura Go Direct, robusta e multiuso, offre agli studenti il vantaggio della connettività ovunque e ovunque si lavori. Essendo anche impermeabile, Go Direct Temperature è più durevole dei sensori che sono semplicemente resistenti all'acqua. A differenza di un termometro tradizionale, Go Direct Temperature consente agli studenti di raccogliere misure di temperatura in tempo reale di un singolo caso o di un periodo di tempo. L'intervallo di temperatura e la funzionalità wireless rendono Go Direct Temperature il sensore ideale per le applicazioni reali. La sonda Go Direct Temperature può essere utilizzata in una varietà di esperimenti: Condurre reazioni endotermiche ed esotermiche. Studiare il congelamento e la fusione dell'acqua. Misurare il contenuto energetico degli alimenti. Esaminare l'assorbimento dell'energia radiante. Monitorare le condizioni ambientali. Specifiche tecniche: Intervallo di temperatura: da -40 a 125°C Intervallo di temperatura di manipolazione: da -10 a 45°C Precisione: ±0,25°C Tempo di risposta (tempo per il 90% della lettura): 20 secondi (in acqua, con agitazione) Connessioni: Senza fili: Bluetooth Con cavo: USB Incluso: Sensore di temperatura Go Direct Cavo micro USB Guida rapida

CHF 161.00*

Surface Temperature Sensor

The Surface Temperature Sensor is designed for use in situations in which low thermal mass or flexibility is required, or for a skin temperature measurement. The Surface Temperature Sensor has an exposed thermistor that results in an extremely rapid response time. This design allows for use in air and water. For temperature measurements in harsher environments that require a more durable probe, we recommend our Stainless Steel Temperature Probe (TMP-BTA). Temperature range:–25 to 125°C (–13 to 257°F) Typical Resolution:0.08°C (–25 to 0°C)0.03°C (0 to 40°C)0.1°C (40 to 100°C)0.25°C (100 to 125°C) Accuracy:±0.2°C at 0°C±0.5°C at 100°C User manual

CHF 79.50*