Extra-Long Temperature Probe

The Stainless Steel Temperature Probe is a rugged, general-purpose temperature sensor that can be used in organic liquids, salt solutions, acids, and bases. Use it as you would use a thermometer for experiments in chemistry, physics, biology, Earth science, and environmental science. Temperature range:–40 to 135°C (–40 to 275°F) Typical Resolution:0.17°C (–40 to 0°C)0.03°C (0 to 40°C)0.1°C (40 to 100°C)0.25°C (100 to 135°C) Accuracy:±0.2°C at 0°C±0.5°C at 100°C User manual

La sonda di temperatura Go Direct è un robusto sensore di temperatura per uso generale che gli studenti possono utilizzare per monitorare la temperatura. Si collega direttamente alla piattaforma in modalità wireless tramite Bluetooth® o via cavo tramite USB. La sonda di temperatura Go Direct, robusta e multiuso, offre agli studenti il vantaggio della connettività ovunque e ovunque si lavori. Essendo anche impermeabile, Go Direct Temperature è più durevole dei sensori che sono semplicemente resistenti all'acqua. A differenza di un termometro tradizionale, Go Direct Temperature consente agli studenti di raccogliere misure di temperatura in tempo reale di un singolo caso o di un periodo di tempo. L'intervallo di temperatura e la funzionalità wireless rendono Go Direct Temperature il sensore ideale per le applicazioni reali. La sonda Go Direct Temperature può essere utilizzata in una varietà di esperimenti: Condurre reazioni endotermiche ed esotermiche. Studiare il congelamento e la fusione dell'acqua. Misurare il contenuto energetico degli alimenti. Esaminare l'assorbimento dell'energia radiante. Monitorare le condizioni ambientali. Specifiche tecniche: Intervallo di temperatura: da -40 a 125°C Intervallo di temperatura di manipolazione: da -10 a 45°C Precisione: ±0,25°C Tempo di risposta (tempo per il 90% della lettura): 20 secondi (in acqua, con agitazione) Connessioni: Senza fili: Bluetooth Con cavo: USB Incluso: Sensore di temperatura Go Direct Cavo micro USB Guida rapida

Description This sensor has an exposed thermistor that results in an extremely rapid response time, and this design allows for use in air and water.  Use this sensor in a variety of experiments:   Investigate the effect of temperature on solar panel output. Explore passive solar heating or solar collectors. Examine the warming function of nasal passageways. Discover the effect of vascularity on skin temperature recovery. Important: For use in air and water only. For temperature measurements in harsher environments that require a more durable probe, we recommend the Go Direct® Temperature Probe.  Rechargeable Battery—Ready When You Are The robust rechargeable battery offers long battery life and provides always-ready operation when using the sensor wirelessly. Monitor battery life directly from our free Graphical Analysis™ 4 app or LabQuest 2 App. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students. Wired or Wireless—The Flexibility to Choose Our Go Direct sensors connect directly to your mobile device, Chromebook™, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth® wireless technology, allowing you to choose the solution best for your classroom or laboratory.   Specifications Range: –25 to 125°C Maximum temperature that the sensor can tolerate without damage: 150°C Accuracy: ±0.5°C Response time (from 25°C to 100°C in water): 5 seconds Probe dimensions: Probe handle: Length: 6.8 cm Width: 2.25 cm Thickness: 1.3 cm Cable length: 1 m Connections: Wireless: Bluetooth Wired: USB  

The Surface Temperature Sensor is designed for use in situations in which low thermal mass or flexibility is required, or for a skin temperature measurement. The Surface Temperature Sensor has an exposed thermistor that results in an extremely rapid response time. This design allows for use in air and water. For temperature measurements in harsher environments that require a more durable probe, we recommend our Stainless Steel Temperature Probe (TMP-BTA). Temperature range:–25 to 125°C (–13 to 257°F) Typical Resolution:0.08°C (–25 to 0°C)0.03°C (0 to 40°C)0.1°C (40 to 100°C)0.25°C (100 to 125°C) Accuracy:±0.2°C at 0°C±0.5°C at 100°C User manual

This rugged temperature probe features a wide temperature range, from –20 to 330°C. The high upper limit of the sensor allows for melting point determinations of most organic compounds. Vernier’s wide-range temperature probe uses RTD (Resistance Temperature Detection) technology to establish a ±0.1°C accuracy, as well as excellent stability and repeatability. Each unit is individually calibrated, and the calibration is stored on a smart chip in the sensor. It is designed to be used as you would use a thermometer for experiments in organic and inorganic chemistry, physics, biology, Earth science, and environmental science. Temperature range:–20 to 330°C (–4 to 626°F) Typical Resolution:0.10°C Accuracy:±0.1°C at 0°C User manual

The Vernier EasyTemp is a rugged, general-purpose temperature sensor for TI graphing handhelds. Vernier EasyTemp has a mini-A USB connector that allows you to attach the temperature probe directly to the USB port of a TI-84 Plus graphing calculator or TI-Nspire handheld. Connecting the sensor to the calculator or handheld will automatically launch the data collection application, and you are ready to collect data. Temperature range:–20 to 115°C Maximum temperature that the sensor can tolerate without damage:150°C Resolution:0.07°C Accuracy:±0.5°C Response time:4 s (to 90% of full reading in water) User manual

The Go Direct Temperature Probe is a rugged, general-purpose temperature sensor that students can use to monitor temperature. It directly connects wirelessly via Bluetooth® or wired via USB to your platform. The rugged, all-purpose Go Direct Temperature Probe gives students the advantage of go-anywhere, work-anywhere connectivity. Because it is also waterproof, Go Direct Temperature is more durable than sensors that are simply water resistant. Unlike a traditional thermometer, Go Direct Temperature allows students to collect real-time temperature measurements of a single instance or over a period of time. Its temperature range and wireless capability make Go Direct Temperature the go-to sensor for real-world applications. The Go Direct Temperature Probe can be used in a variety of experiments: Conduct endothermic and exothermic reactions. Investigate the freezing and melting of water. Measure the energy content of foods. Examine the absorption of radiant energy. Monitor environmental conditions. Specifications: Temperature range: –40 to 125°C Handle temperature range: –10 to 45°C Resolution: 0.07°C Connections:    Wireless: Bluetooth Wired: USB Included: 8 Go Direct Temperature sensors Charging Station Quick-start guide

Description Designed to be used as you would use a thermometer for experiments such as the recrystallization of benzoic acid, simple and fractional distillations, determination of boiling points, the synthesis and analysis of aspirin and other organic compounds, and more. Range of –20 to 330°C allows for investigations such as determining the melting point of caffeine or the boiling point of different vegetable oils RTD (Resistance Temperature Detector) technology establishes a ±0.5°C accuracy. Rechargeable Battery—Ready When You Are The robust rechargeable battery offers long battery life and provides always-ready operation when using the sensor wirelessly. Monitor battery life directly from our free Graphical Analysis™ 4 app or LabQuest 2 App. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students. Wired or Wireless—The Flexibility to Choose Our Go Direct sensors connect directly to your mobile device, Chromebook™, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth® wireless technology, allowing you to choose the solution best for your classroom or laboratory.  Specifications Range: –20 to 330°C Maximum temperature that the sensor can tolerate without damage: 380°C Temperature detector: Platinum RTD (100 Ohm) Accuracy: ±0.2°C at 100°C Response time (from 25°C to 100°C in water): 30 seconds Probe dimensions: Probe length (handle plus body): 24.5 cm Stainless steel body: Length: 17 cm Diameter: 6.4 mm Probe handle: Length: 6.8 cm Width: 2.25 cm Thickness: 1.3 cm Connections: Wireless: Bluetooth Wired: USB

The PAR (Photosynthetically Active Radiation) Sensor reports the Photosynthetic Photon Flux Density (PPFD), which corresponds to micromoles of photons per meter squared per second (μmol m-2 s-1). This is the power of electromagnetic radiation in the spectral range that is used by plants for photosynthesis (400–700 nm). It features a waterproof sensor head and can be used to measure PPFD from sunlight and electric light sources. This sensor is ideal for experiments investigating photosynthesis and primary productivity and can be used in many agricultural and environmental science applications. PAR Range:0 to 2000 μmol m-2 s-1 (PPFD) in full sun Absolute Accuracy:±5% Typical Resolution:1 μmol m-2 s-1 (PPFD) User manual