Conductivity Medium Range Standard
CHF 59.10*
Content:
1 Stück
delivery time: usually around 3 weeks
Product number:
CON-MST
Product information "Conductivity Medium Range Standard"
For most applications, the Conductivity Probe and Go Direct® Conductivity Probe do not need to be calibrated. If you choose to calibrate it, you will need accurate standard solutions.
Login
Skip product gallery
Accessory Items
Conductivity Probe
CHF 297.60*
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This has many applications in chemistry, biology, and environmental science.
Specifications
Range:Low Range: 0 to 200 μS/cm (0 to 100 mg/L TDS)
Mid Range: 0 to 2000 μS/cm (0 to 1000 mg/L TDS)
High Range: 0 to 20,000 μS/cm (0 to 10,000 mg/L TDS)
Typical Resolution:Low Range: 0.1 μS/cm (0.05 mg/L TDS)
Mid Range: 1 μS/cm (0.5 mg/L TDS)
High Range 10 μS/cm (5 mg/L TDS)
Accuracy using factory calibration:±8% of full-scale reading for low range
±3% of full-scale reading for mid range
±4% of full-scale reading for high range
Accuracy using custom calibration: ±2% of full-scale reading for each range
Response Time: 98% of full-scale reading in 5 seconds, 100% of full-scale in 15 seconds
Temperature Compensation: automatic from 5 to 35 °C
Temperature Range (can be placed in): 0 to 80 °C
Cell Constant: 1.0 cm-1
Description: ABS body, parallel carbon (graphite) electrodes
Dimensions: 12 mm OD and 150 mm length
What's included
Vernier Conductivity Probe
90 mL bottle of 1000 µS/cm NaCl standard solution
User Manual - CON-BTA
Microstirrer
CHF 18.30*
This is a replacement for the Microstirrer that ships with our Drop Counters. It takes the place of a magnetic stir bar but it attaches directly to the end of a pH sensor, or similar 12 mm OD sensor. The Microstirrer results in enhanced stirring near the electrode tip.
User Manual - MSTIR
Skip product gallery
Similar Items
Go Direct™ Conductivity Probe
CHF 295.60*
The Go Direct Conductivity Probe determines the ionic content of an aqueous solution by measuring its electrical conductivity. It connects via Bluetooth® wireless technology or via USB to your device.
Specifications
Range: 0 to 20,000 μS/cm (0 to 10,000 mg/L TDS)
Accuracy using factory calibration: ±1% of full scale reading (valid for 1 to 10,000 µS/cm)
Temperature compensation: Automatic from 5 to 35°C, can be turned off
Temperature range (can be placed in): 0 to 80°C
Cell constant: 1.0 cm-1
Resolution: 0.01 µS/cm
Description: ABS body, parallel carbon (graphite) electrodes
Dimensions: 12 mm OD and 12 cm length
Connections:Wireless: Bluetooth
Wired: USB
What's included
Go Direct Conductivity Probe
Micro USB Cable
User Manual - GDX-CON