Go to homepage
CHF 0.00*

Bildungsstufen: 7. Bis 11. Klasse (Sekundarstufe I)
Alter: ca. 11 bis 14 Jahre

Filter products

–
Stainless Steel Temperature Probe
Stainless Steel Temperature Probe
The Stainless Steel Temperature Probe is a rugged, general-purpose temperature sensor that can be used in organic liquids, salt solutions, acids, and bases. Use it as you would use a thermometer for experiments in chemistry, physics, biology, Earth science, and environmental science. Specifications Temperature range: –40 to 135°C (–40 to 275°F) Maximum temperature that the sensor can tolerate without damage: 150°C Typical Resolution:0.17°C (–40 to 0°C) 0.03°C (0 to 40°C) 0.1°C (40 to 100°C) 0.25°C (100 to 135°C) Temperature sensor: 20 kΩ NTC Thermistor Accuracy: ±0.2°C at 0°C, ±0.5°C at 100°C Response time (time for 90% change in reading):10 seconds (in water, with stirring) 400 seconds (in still air) 90 seconds (in moving air) Probe dimensions:Probe length (handle plus body): 15.5 cm Stainless steel body: length 10.5 cm, diameter 4.0 mm Probe handle: length 5.0 cm, diameter 1.25 cm What's included Vernier Stainless Steel Temperature Probe User Manual - TMP-BTA

CHF 87.60*
Go Direct Force and Acceleration Sensor
Go Direct™ Force and Acceleration Sensor
The Go Direct Force and Acceleration Sensor couples a 3-axis accelerometer with a stable and accurate force sensor that measures forces as small as ±0.1 N and up to ±50 N. Measure pushes and pulls in the classroom or outdoors. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Force: ±50 N Acceleration: 3 axis, ±16 g Gyroscope: 3 axis, 2000°/s Accuracy: ±0.2 N when calibrated Connections:Wireless: Bluetooth Wired: USB What's included Go Direct Force and Acceleration Sensor Hook Bumper Nylon screw Accessory rod Micro USB Cable User Manual - GDX-FOR

CHF 252.80*
LabQuest Mini
LabQuest Mini
LabQuest Mini (Model 2) is a powerful, affordable, and easy-to-use sensor interface for data collection on a computer or a Chromebook. User Manual - LQ-MINI

CHF 405.70*
Go Direct™ Temperature Sensor
Go Direct™ Temperature Sensor
The Go Direct Temperature Probe is a rugged, general-purpose sensor that students can use to monitor temperature. It connects via Bluetooth® wireless technology or via USB to your device. Save money when you purchase the Go Direct Temperature Teacher Pack, which includes 8 Go Direct Temperature Probes and a Go Direct® Charge Station. Specifications Range: –40 to 125°C Handle range: –10 to 45°C Resolution: 0.01°C Accuracy: ±0.25°C Response time (time for 90% of reading): 20 seconds (in water, with stirring) Connections:Wireless: Bluetooth Wired: USB What's included Go Direct Temperature Go Direct Temperature Probe Micro USB Cable Quick-start guide Go Direct Temperature Teacher Pack 8 Go Direct Temperature Probes Charge Station 8 Micro USB Cables Quick-start guide User Manual - GDX-TMP

CHF 161.00*
Go Direct pH Sensor
Go Direct™ pH Sensor
The Go Direct pH Sensor is a general-purpose pH sensor used to monitor pH of aqueous solutions. It connects via Bluetooth® wireless technology or via USB to your device. Save money when you purchase the Go Direct pH Teacher Pack, which includes 8 Go Direct pH Sensors and a Go Direct® Charge Station. Specifications pH range: 0–14 Accuracy with new electrode (pH): ±0.2 Type: Sealed, gel-filled, polycarbonate body, Ag/AgCl reference, single junction Shaft diameter: 12 mm OD Storage solution: pH-4/KCl solution (10 g KCl in 100 mL buffer pH-4 solution) Connections:Wireless: Bluetooth Wired: USB What's included Go Direct pH Go Direct pH Sensor (includes Go Direct Electrode Amplifier) pH storage solution bottle with pH storage solution Micro USB Cable Quick-start guide Go Direct pH Teacher Pack 8 Go Direct pH Sensors 8 pH storage solution bottles with pH storage solution Charge Station 8 Micro USB Cables Quick-start guide User Manual - GDX-PH

CHF 242.60*
pH Sensor
pH Sensor
Our general-purpose pH Sensor can be used across disciplines, including chemistry, biology, middle school science, and environmental science. Specifications Range: pH 0–14 Accuracy with new electrode (pH): ±0.2 Type: Sealed, gel-filled, polycarbonate body, Ag/AgCl reference, single junction Shaft Diameter: 12 mm OD Storage solution: pH-4/KCl solution (10 g KCl in 100 mL buffer pH-4 solution) What's included Vernier pH Sensor pH storage solution pH storage solution bottle User Manual - PH-BTA

CHF 254.80*
Go Direct SpectroVis
Go Direct™ SpectroVis® Plus Spectrophotometer
The Go Direct SpectroVis Plus Spectrophotometer quickly measures a full wavelength spectrum. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Wavelength Range: 380 nm–950 nm Support for fluorescence: Two excitation sources centered at 405 nm and 500 nm Reported Wavelength Interval: ~1 nm between reported values (collects 570 values) Optical resolution (FWHM): 5.0 nm Wavelength accuracy: ± 4.0 nm Photometric accuracy: ± 0.10 A.U. Dimensions: 15 cm x 9 cm x 4 cm Light Sources: Incandescent white bulb, approximately 8000 hour lifetime, one-step calibration. LED-based, approximately 100,000 hour lifetime. No external power is required. Typical scan time: ~2 s Connections:Wireless: Bluetooth Wired: USB What's included Go Direct SpectroVis Plus Spectrophotometer 15 plastic cuvettes and lids Mini USB Cable Power supply User Manual - GDX-SVISPL-INTL

CHF 1,037.70*
Dual-Range Force Sensor
Dual-Range Force Sensor
Use the Dual-Range Force Sensor in a wide variety of experiments, including the study of friction, simple harmonic motion, impact in collisions, or centripetal force. Specifications ± 10 N Range Resolution: 0.01 N ± 50 N Range Resolution: 0.05 N Accuracy: ±0.2 N when calibrated What's included Dual-Range Force Sensor Hook Bumper Nylon thumb screw Accessory Rod User Manual - DFS-BTA

CHF 262.90*
Photogate
Photogate
Use the Photogate to study free fall, rolling objects, collisions, and pendulums. Specifications Power req: 5 VDC at 40 mA Infrared source: Peak at 880 nm Dimension: 75 mm gate width Output is high and LED off for unblocked gate Output is low and LED on for blocked gate Beam approximately 9 mm from the end of the gate arms Resolution: 1μs What's included Vernier Photogate (1) Interface cable (1) Accessory rod User Manual - VPG-BTD

CHF 140.60*
Go Direct Gas Pressure Sensor
Go Direct™ Gas Pressure Sensor
The Go Direct Gas Pressure Sensor measures the absolute pressure of a gas. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Range: 0 to 400 kPa Resolution: 0.03 kPa Accuracy: ±3 kPA Maximum sampling rate: 50 samples/s Internal volume: 0.8 mL Maximum pressure that the sensor can tolerate without permanent damage: 450 kPa Connections:Wireless: Bluetooth Wired: USB What's included Vernier Go Direct Gas Pressure Sensor Tapered valve connectors (Stopper Stems)(2) inserted into a No. 5 stopper Tapered valve connector (Stopper Stem)(1) inserted into a No. 1 stopper Two-way valve 18 inch Tygon tubing with Luer Lock connectors 20 mL syringe White transpiration tubing clamps (2) User Manual - GDX-GP

CHF 242.60*
LabQuest 3
LabQuest 3
LabQuest® 3 is a powerful, advanced, easy-to-navigate, and versatile data-logging solution for STEM students. The built-in data-collection and analysis app works with all Vernier sensors, supporting hands-on data collection in the classroom, in the lab, and in the field. LabQuest 3 includes a Micro USB Cable and LabQuest 3 Power Supply. Specifications Display 15.41 cm x 8.59 cm (17.64 cm diagonal) screen LED backlight Landscape screen orientation Connectivity Wi-Fi 802.11 b/g/n @ 2.4GHz Bluetooth® wireless technology Touch Interface Capacitive touch screen Touch and drag—Use touch and drag to select regions on a graph or to scroll through menus. Long Press—Use the long press to activate special functionality on some objects such as holding down the keyboard shift key to enable shift lock, or to initial a table selection. Two-Finger Pinch/Zoom/Pan—Use this gesture to manually scale graphs or pan the data table. Double tap—Double tap to scale the graph to fit the data or to edit elements of the data table such as cell data (when allowed), column name, or dataset name. Single-finger swipe (from edges)—This gesture is used to change what app is displayed. Data Acquisition 100,000 samples per second 12-bit resolution Built-in GPS and microphone Environmental Durability Operating temperature: 0 – 45°C Storage temperature: -30 – 60°C Splash resistant Rugged enclosure designed to withstand a fall from lab bench Size and Weight Size: 11.7 cm x 19.0 cm x 4.0 cm Weight: 549 g Ports 3 analog ports 2 digital ports 2 full-size USB ports for sensors Micro USB port for computer communication Audio out DC power port Storage 500 MB Expandable with USB flash drive Power Rechargeable, high-capacity battery DC charging/powering through external adapter (included) User Manual - LABQ3-INTL

CHF 935.70*
Go Direct® CO2 Gas Sensor
Go Direct® CO2 Gas Sensor
The Go Direct CO2 Gas Sensor measures gaseous carbon dioxide concentration levels, air temperature, and relative humidity. It can be used in a variety of biology experiments. It connects via Bluetooth® wireless technology or via USB to your device. Specifications CO2 SensorType: NDIR Range: 0–100,000 ppm Accuracy: 0 to 100,000ppm: ±(100ppm＋5% reading value) Resolution: 1 ppm CO2 Temperature SensorType: integrated circuit (IC) Accuracy: ±0.4 °C Resolution: 0.1°C Range: -10 to +50 °C Relative Humidity SensorType: integrated circuit (IC) Accuracy: ± 2% Resolution: 0.1% Range: 0 to 100% (non-condensing) DimensionsSensor shaft length: 82 mm Sensor shaft diameter: 28 mm Total length: 200 mm ConnectionsWireless: Bluetooth Wired: USB What's included Go Direct® CO2 Gas Sensor Micro USB Cable 250 mL Nalgene Bottle w/Lid User Manual - GDX-CO2

CHF 507.60*
GDX-VPG
Go Direct® Photogate
Go Direct Photogate is a double-gate sensor that includes two photogates built into the arms of the sensor, which accurately measures velocity and acceleration. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Infrared source: Peak at 880 nm Gate width: 77.5 mm Internal gate separation: 20 mm Distance from internal gates to bottom of photogate arms: ~10 mm Distance from internal gates to sides of photogate arms: ~5 mm Gate LED indicators: Off for unblocked gate, on for blocked gate Resolution: 1 μs Accuracy: ±1.0% FS Battery: 650 mAh Li-Poly Rechargeable Battery life (single full charge): ~10 hours continuous data collection Battery life (long term): ~300 full charge cycles (several years depending on usage) What's included Go Direct Photogate Accessory Rod Micro USB Cable User Manual - GDX-VPG

CHF 222.20*
Go! Link
Go! Link
Vernier’s low-cost USB sensor interface connects Vernier sensors to a computer or to a Chromebook. The Go!Link USB sensor interface is a quick and affordable way to get started with data-collection technology. It’s a single-channel interface that connects most Vernier sensors to your computer or Chromebook USB port. Setting up data-collection experiments is as simple as 1-2-3: Plug the Go!Link to a USB port and a sensor into the Go!Link. Start the data-logging software. Click on the “Collect” button to see a real-time graph! USB specification:1.1 Maximum sample rate:Computer: 200 samples per secondChromebook: 10 samples per second Resolution:12 bit

From CHF 181.40*
Details
Go Direct™ Motion Detector
Go Direct™ Motion Detector
The Go Direct Motion Detector uses ultrasound to measure the position, velocity, and acceleration of moving objects. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Range: 15 cm to 3.5 m Resolution: 1 mm Maximum sampling rate: 30 samples/s Accuracy: ≤±1.0％ FS Connections:Wireless: Bluetooth Wired: USB What's included Vernier Go Direct Motion Detector Micro USB Cable User Manual - GDX-MD

CHF 283.30*
Microphone
Microphone
Use the Microphone to display and study the waveforms of sounds from voices and musical instruments. It also works well for speed of sound experiments. Specifications Frequency Range: approximately 100 Hz to 15 kHz Power: 1.45 mA @ 5 VDC What's included Vernier Microphone User Manual - MCA-BTA

CHF 132.50*
Go Direct® Wide-Range Temperature Probe
Go Direct® Wide-Range Temperature Probe
Measuring the temperature of a distillation has never been safer—your students can conduct an experiment within the laboratory fume hood while collecting data at their lab station. The Go Direct Wide-Range Temperature Probe connects via Bluetooth® wireless technology or via USB to your device. Specifications Range: –20 to 330°C Maximum temperature that the sensor can tolerate without damage: 380°C Temperature detector: Platinum RTD (100 Ohm) Accuracy: ±0.2°C at 100°C Response time (from 25°C to 100°C in water): 30 seconds Probe dimensions:Probe length (handle plus body): 24.5 cm Stainless steel body:Length: 17 cm Diameter: 6.4 mm Probe handle:Length: 6.8 cm Width: 2.25 cm Thickness: 1.3 cm Connections:Wireless: Bluetooth Wired: USB What's included Go Direct Wide Range Temperature Probe Micro USB Cable Quick-start guide User Manual - GDX-WRT

CHF 344.50*
Motion Detector
Motion Detector
The Motion Detector is used to measure position, velocity, and acceleration of moving objects. Specifications Range: 0.15 to 6 m Resolution: 1 mm Accuracy: ≤±1.0％ FS What's included Vernier Motion Detector Digital Sensor Cable User Manual - MD-BTD

CHF 285.40*
Magnetic Field Sensor
Magnetic Field Sensor
The Magnetic Field Sensor can be used to study the field around permanent magnets, coils, and electrical devices. It features a rotating sensor tip to measure both transverse and longitudinal magnetic fields. Specifications Typical Resolution ± 0.32 mT range: 0.0002 mT ± 6.4 mT range: 0.004 mT What's included Vernier Magnetic Field Sensor User Manual - MG-BTA

CHF 224.20*
STS-BTA
Surface Temperature Sensor
The Surface Temperature Sensor is designed for use in situations in which low thermal mass or flexibility is required, or for a skin temperature measurement. Specifications Temperature range: –25 to 125°C (–13 to 257°F) Maximum temperature that the sensor can tolerate without damage: 150°C Resolution: 0.025°C – 0.15°C Temperature sensor: 20 kΩ NTC Thermistor Accuracy: ±0.2°C at 0°C, ±0.5°C at 100°C Response time (time for 90% change in reading)50 seconds (in still air) 20 seconds (in moving air) Probe dimensions: Probe length (handle plus body) 15.5 cm Important: For use in air and water only. For temperature measurements in harsher environments, we recommend the Stainless Steel Temperature Sensor. What's included Vernier Surface Temperature Sensor User Manual - STS-BTA

CHF 79.50*
Go Direct® Spirometer
Go Direct® Spirometer
Go Direct Spirometer is designed to make human respiratory measurements easy. Specifications Flow rate range: ±10 L/s Flow head:Volume: 41 mL Dimensions: 29.5 mm (diameter) × 82 mm (length) Mass: 69 g Construction: ABS plastic Connections:Wireless: Bluetooth Wired: USB What's included Go Direct Spirometer Disposable mouthpieces (3) Disposable bacterial filter (3) Nose clips (3) Micro USB Cable User Manual - GDX-SPR

CHF 507.60*
GDX-O2
O2 Gas Sensor
The Go Direct O2 Gas Sensor measures gaseous oxygen concentration levels and air temperature. It is useful for a variety of biology and physiology experiments. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Oxygen SensorCell type: Electrochemical cell Range: 0–100% (0–1000 ppt) O2 Accuracy (at standard pressure 760 mm Hg): ±1% O2 Resolution: 0.01% O2 Temperature SensorType: Thermistor Accuracy: ±0.5°C Resolution: 0.1°C DimensionsSensor tube length: 38 mm Sensor tube diameter: 28 mm Total length: 155 mm ConnectionsWireless: Bluetooth Wired: USB What's included Go Direct® O2 Gas Sensor Micro USB Cable 250 mL Nalgene Bottle w/Lid User Manual - GDX-O2

CHF 487.20*
Go Direct® pH BNC Electrode
Go Direct® pH BNC Electrode
A general-purpose pH electrode that connects to a Go Direct® Electrode Amplifier. Specifications Type: Sealed, gel-filled polycarbonate body, Ag/AgCl Temperature Range: 5 to 80°C (readings not compensated) 12 mm outer diameter Range: pH 0–14 Isopotential pH: pH 7 (point at which temperature has no effect on output) BNC Connector What's included Go Direct pH Electrode BNC pH storage solution bottle with pH storage solution User Manual - GDX-PH-BNC

CHF 101.90*
Digital Sensor Cable
Digital Sensor Cable
This cable connects Vernier motion detectors and drop counters to the digital (DIG) port on a Vernier interface. User Manual - MDC-BTD

CHF 16.30*
This website uses cookies to ensure the best experience possible. More information...