Zubehör

Unterlagen in Deutsch, finden Sie hier: http://de.vernier.education

LabQuest® 2, LabQuest Stream™, and Go Direct SpectroVis Plus Battery

Replacement high-capacity, rechargeable, lithium-ion battery for the Vernier LabQuest 2. This battery is not compatible with LabQuest 3. See the replacement battery for LabQuest 3. User Manual - LQ2-BAT

CHF 59.10*

250 mL Nalgene Bottle w/Lid

This is the same bottle that ships with the CO2 Gas, O2 Gas, and Ethanol Sensors. User Manual - CO2-BTL

CHF 10.10*

Plastic 2-Way Valve

Plastic stopcock with Luer-Lock connections. Part of the Pressure Sensor Accessories Kit and a replacement part for the Drop Counter. User Manual - PS-2WAY

CHF 6.10*

EKG Electrodes

Each of the three leads on any EKG sensor connects to a disposable electrode. A package of 100 disposable electrodes is included with the sensor. This is a replacement package of 100 electrodes for use with the EKG sensor and Go Direct EKG. User Manual - ELEC

CHF 38.70*

Vernier Spectrophotometer Optical Fiber

This is an optical fiber accessory designed exclusively for emission spectrum experiments with Vernier-branded spectrophotometers, including Go Direct® SpectroVis® Plus, Go Direct UV-VIS Spectrophotometer, Go Direct Fluorescence/UV-VIS Spectrophotometer, Vernier UV-VIS, and Vernier Fluorescence/UV-VIS. User Manual - VSP-FIBER

CHF 161.00*

Digital Sensor Cable

This cable connects Vernier motion detectors and drop counters to the digital (DIG) port on a Vernier interface. User Manual - MDC-BTD

CHF 16.30*

Replacement Rod, 5 inch

A replacement rod for a force sensor, photogate, or anemometer. User Manual - ACC-ROD

CHF 10.10*

Adjustable End Stop

Attaches to the end of the Vernier Dynamics Track to prevent the cart from leaving the track. User Manual - AS-VDS

CHF 18.30*

Luer-Lock Connector

Small connector that fits in the end of the plastic tubing and allows a Luer-Lock connection. Part of the Pressure Sensor Accessories Kit. User Manual - PS-LUER

CHF 2.00*

Electrode Support

Our Electrode Support is a great complement to the Vernier Stir Station, as well as a perfect holder for many sensors. It is built to connect to all standard ring-stand posts; its large-handled locking nut keeps your sensors firmly in place. The larger opening (13 mm in diameter) is perfect for our pH, ISE, Conductivity and ORP sensors. The smaller opening (5 mm) is designed to hold our Stainless Steel Temperature Probe or the Vernier Go!Temp. What's included Electrode Support User Manual - ESUP

CHF 20.30*

Vernier Disposable Mouthpiece for Spirometer 100 Pcs

For a more sterile environment, use the cardboard mouthpieces to help eliminate the spreading of contagious material between students. User Manual - SPR-MP100

Content: 100 Stück (CHF 0.92* / 1 Stück)

CHF 91.70*

BioChamber 2000

The BioChamber 2000 is a 2000 mL plastic chamber that can be used with a CO2 Gas Sensor and an O2 Gas Sensor to monitor gaseous carbon dioxide and oxygen levels simultaneously in a closed system. User Manual - BC-2000

CHF 50.90*

Reflex Hammer Accessory Kit

The Reflex Hammer Accessory Kit converts your Vernier force sensor into a reflex hammer. Use it to capture the strike of the hammer on a tendon. When used with an EKG sensor to record EMGs, students can study reflexes. By comparing the timing of the strike to the timing of the muscle activity, students can calculate the time required for a reflex to occur. The Go Direct Force and Acceleration Sensor is not included. User Manual - RFX-ACC

CHF 71.30*

Cuvette Rack

A plastic cuvette rack for holding up to 10 cuvettes during experiments. User Manual - CUV-RACK

CHF 18.30*

pH Storage Solution

This is a 500 mL bottle of the pH Storage Solution. Use it as needed to replace spilled or contaminated solution. User Manual - PH-SS

CHF 59.10*

Vernier Disposable Mouthpiece for Spirometer 30 Pcs

For a more sterile environment, use the cardboard mouthpieces to help eliminate the spreading of contagious material between students. User Manual - SPR-MP30

Content: 30 Stück (CHF 1.29* / 1 Stück)

CHF 38.70*

Go Direct® Charge Station

The Go Direct® Charge Station is the perfect solution for charging your Go Direct Sensors. Each charge station has sixteen charging ports—eight USB and eight wand-style sensor ports. LED lights on the Go Direct sensors will show charging status. The Go Direct Charge Station is also compatible with Go Wireless devices. USB cables not included. User Manual - GDX-CRG-EURO

CHF 232.40*

Laser Pointer

This Class 2 (<1 mW) laser pointer can be used with a Vernier Photogate or Go Direct® Photogate to produce a gate that is wider than the normal 7.5 cm spacing, making it possible to measure the speed of an automobile or of a person running. The laser case is made of aluminum, and it uses two AAA batteries (included). The wavelength of the light is 650 nm. A momentary switch (normally off) controls the laser beam. User Manual - LASER

CHF 59.10*

Ultra Pulley Attachment

Add an Ultra Pulley to your Photogate to monitor motion as a string passes over the pulley, or as the pulley rolls along a table. You can also connect the ultra pulley to our track with the Pulley Bracket. User Manual - SPA

CHF 50.90*

Breadboard Cable (Analog)

The Breadboard Cable (Analog) provides an easy way for students to build their own sensor circuitry and input the signal into a Vernier interface for data acquisition. User Manual - BB-BTA

CHF 30.50*

International Power Supply for LabPro, WDSS, and Stir Station

This is a 6-volt, DC, tip-negative power supply for use with Vernier LabPro, CBL 2, Digital Control Unit, Stir Station and Wireless Dynamics Sensor System. If you need a US power supply, use Vernier Power Supply for LabPro, WDSS, and Stir Station. User Manual - PSLP-INT

CHF 59.10*

LabQuest International Power Supply

Use the LabQuest international power supply to charge or power the LabQuest from common international power outlets. User Manual - LQ3-PS-INTL

CHF 38.70*

BioChamber 250

The BioChamber 250 is a 250 mL Nalgene bottle that can be used with a CO2 Gas Sensor and an O2 Gas Sensor to monitor gaseous carbon dioxide and oxygen levels simultaneously in a closed system. User Manual - BC-250

CHF 18.30*

Analog BTA Cable

This cable can be used to connect your homemade analog sensors you make to Vernier interfaces. There is a BTA plug on one end and six bare wires on the other end. The cable is approximately 1.5 m long. User Manual - CB-BTA

CHF 10.10*

Filter products