This completely wireless system simplifies experiment setup and allows basic experiments to be conducted with or without the track. Description The Dynamics Cart and Track System with Go Direct Sensor Cart includes essential laboratory equipment for teaching dynamics and kinematics. Using our Go Direct Sensor Cart, students can explore force, position, velocity, and acceleration directly on their Bluetooth®-enabled device—no wires or additional equipment required. Each cart features built-in sensors to simplify experiment setup and allow experiments to be conducted on or off the track. Specifications Position resolution: 0.25 mm, reported by default at 1 mm steps Force range: ±50 N Accelerometer range: ±160 m/s2 Track length: 1.2 m Shipping costs standard version: The standard version 1.2m is sent as PostPac Economy bulky goods. The total shipping costs are CHF 31.00.   Shipping costs long version: The long track version 2.2m is shipped by freight forwarding. The costs for shipping amount to a total of CHF 74.00.

Attaches to the end of the Vernier Dynamics Track to prevent the cart from leaving the track. User Manual - AS-VDS

The Combination Dynamics Track and Optical Bench is aluminum and includes a metric scale. Extremely rigid, this 1.2 meter track will not sag under use. The track includes 2 Adjustable Two Foot Levelers.   Dieser Artikel wird mit PostPac Economy Sperrgut versendet. Die Kosten für den Versand sind insgesamt 31 CHF.

The Motion Detector Reflector Flag is used to make the setup of motion detector-based experiments less critical. The flag attaches to the cart end with magnets. It increases the size and uniformity of the cart end, serving as a reflector for the Motion Detector. It is compatible with both plastic and metal dynamics carts, but not compatible with Go Direct Sensor Carts or fan carts. Specifications Dimensions: About 9.5 cm x 9.5 cm Mass: About 24 g User Manual - DTS-FLAG

The Cart Fan is a modular fan you can add to the Dynamics Cart and Track System and Go Direct® Sensor Carts that gives students the ability to perform kinematics and dynamics experiments. Specifications Attaches to Go Direct Sensor Carts and Dynamics Cart and Track System (DTS) Carts Mounting plate accommodates 1, 2, or 3 fans Fan(s) can be oriented up to 75°off-center (in 15°intervals) 4 thrust levels (low, medium, high, super) 4 duration levels (1, 3, 6, 60 s) Includes rechargeable battery and charging cable What's included Cart Fan Mounting Plate with captive screws for Go Direct Sensor Cart Screws for attaching to DTS Cart Micro-USB cable for charging User Manual - DTS-CFAN

The Go Direct Sensor Cart Accessory Kit includes springs, magnets, masses, and replacement parts for the Go Direct Sensor Cart. The kit makes multiple-collision experiments possible, supporting impulse and momentum/energy conservation experiments, among others. What's included Heavy hoop spring bumper (1) Light hoop spring bumper (1) Masses (4) Magnetic bumper (2) Force sensor hook (3) Rubber bumper (3) Anti-roll peg (3) User Manual - GDX-CART-AK

Add a Friction Pad DTS to your Vernier Go Direct Sensor Cart, Standard Cart, Plunger Cart, or Motion Encoder Cart, and watch the carts move under very consistent friction force. Setting the friction amount is as simple as turning a knob. User Manual - DTS-PAD

These low-friction carts are designed to study motion and collisions on the Vernier Dynamics Track. User Manual - DTS-CART-P

The Rod Clamp is used to attach one end of a Vernier Dynamics Track to a vertical ring stand rod. This configuration is most often used to create a ramp. User Manual - RC-VDS

The Bumper and Launcher Kit contains accessories for experiments involving the Vernier Dual-Range Force Sensor, the Go Direct Force and Acceleration, and the Dynamics Cart and Track System. These accessories include two hoop springs of different stiffnesses, plus additional bumpers for elastic and inelastic collisions. User Manual - BLK

The Polarizer/Analyzer Set extends the Optics Expansion Kit to allow students to study polarization of light. Using a Rotary Motion Sensor to record analyzer angle, Malus's Law experiments are easy, detailed, and accurate. Specifications Polarizer passes vertically polarized light when oriented at 0° or 180°. Adjustable Analyzer for Rotary Motion Sensor includes a mount that works with the Vernier Rotary Motion Sensor or the Go Direct® Rotary Motion Sensor to record the analyzer angle. Adjustable Analyzer includes an angle scale for manual reading of the polarizer angle. What's included Adjustable Analyzer (2) Adjustable Analyzer for Rotary Motion Sensor (1) Mounting Screws for Rotary Motion Sensor (2) Belt for Rotary Motion Sensor (1) User Manual - PAK-OEK

These four 125 gram masses are used to add mass to a cart for dynamics experiments. Compatible only with plastic Vernier carts. Not compatible with older metal dynamics carts. User Manual - DTS-MASS

The Go Direct Sensor Cart features built-in, wireless sensors for one-dimensional dynamics and kinematics experiments. It directly connects wirelessly via Bluetooth® wireless technology to your platform. Description With Go Direct Sensor Cart, students can explore force, position, velocity, and acceleration directly on their Bluetooth-enabled device—no wires or additional equipment required. Each cart features built-in sensors to simplify experiment setup and allow investigations to be conducted on or off the track. Go Direct Sensor Cart can be used for hands-on kinematics and dynamics demonstrations but can also be used as an individual sensor. Hang a mass and spring from the force sensor to study simple harmonic motion, or attach the cart to a turntable to study centripetal acceleration. Each full-featured dynamics cart includes Encoder wheel to report position 3-axis accelerometer to measure independent acceleration ±50 N force sensor to measure push and pulls Mass trays for changing total mass Plunger for collision and impulse studies Low friction wheels for uniform motion Exchangeable magnetic and hook-and-pile inserts for elastic and inelastic collisions

The Dynamics Cart and Track System with Motion Encoder is a revolutionary way for physics students to study dynamics. The Motion Encoder adds an optical position sensing system to record cart motion and eliminates the need for a motion detector for cart-on-track activities. Capture accurate, repeatable motion data with the Motion Encoder Cart and Receiver for sperior cart-on-track experiments. The Motion Encoder Cart replaces the ultrasonic Motion Detector when used for dynamics carton-on-track activities. The Dynamics Cart and Track System with Motion Encoder allows students to explore kinematics, dynamics, momentum, and energy with the ease and precision of optical motion sensing. The Motion Encoder is an optical position sensing system that records cart motion and eliminates the need for a motion detector for cart-on-track activities. In addition to a Motion Encoder Cart and Receiver, this system includes an aluminum track, a low-friction plastic plunger cart, an ultra pulley, and all of the necessary attachment accessories. The Dynamics Cart and Track System with Motin Encoder includes: Combination 1.2 m Track/Optics Bench Motion Encoder Cart with magnetic and hook-and-pile end caps Motion Encoder Receiver Plunger Cart with magnetic and hook-and-pile end caps 4 hexagonal masses, 125 g each Mounting hardware for Dual-Range Force Sensor and accelerometers Adjustable End Stop 2 Adjustable Two-Foot Levelers Motion Detector Bracket Motion Detector Reflector Flag Rod Clamp 2 Photogate Brackets Ultra Pulley Pulley Bracket User manual The long-track version includes the same carts and accessories as the Dynamics Cart and Track System but substitutes a 2.2m Track for the 1.2m Track. &am   Shipping costs standard version: The standard version 1.2m is sent as PostPac Economy bulky goods. The total shipping costs are CHF 31.00.   Shipping costs long version: The long track version 2.2m is shipped by freight forwarding. The costs for shipping amount to a total of CHF 74.00.

The Vernier Dynamics System Replacement Parts Kit includes most of the small parts, such as nuts, bolts, washers, and screws, for 5 Vernier Dynamics Systems. User Manual - VDS-RPK

The Fan Cart is a large fan on a light-weight cart. It offers students the ability to perform kinematics and dynamics experiments with constant acceleration, variable mass, variable thrust, and variable thrust angle. User Manual - CART-F

The Dynamics Cart and Track System provides students with the tools they need to explore kinematics, dynamics, momentum, and energy. This versatile system can also be easily adapted to study optics, color, and diffraction. The Dynamics and Track System is ideal for studying Newton's second law, acceleration on an inclined plane, conservation of momentum, and much more. This traditional cart and track system features an aluminum track, two low-friction, plastic carts, an ultra pulley, and all of the necessary attachment accessories. Easily attach sensors (sold separately) to carts or to the track for data collection, like a Motion Detector, Dual-Range Force Sensor, Wireless Dynamics Sensor System, Photogate, or an Accelerometer. Add the Vernier Optics Expansion Kit (OEK) and use the track as an optics bench. The Dynamics Cart and Track Sytem includes: Combination 1.2 m Track/Optics Bench Standard Cart with magnetic and hook-and-pile end caps Plunger Cart with magnetic and hook-and-pile end caps 4 hexagonal masses, 125 g each Mounting hardware for Dual-Range Force Sensor and accelerometers Adjustable End Stop 2 Adjustable Two-Foot Levelers Motion Detector Bracket Motion Detector Reflector Flag Rod Clamp 2 Photogate Brackets Ultra Pulley Pulley Bracket User manual The long-track version includes the same carts and accessories as the Dynamics Cart and Track System but substitutes a 2.2m Track for the 1.2m Track.   Shipping costs standard version: The standard version 1.2m is sent as PostPac Economy bulky goods. The total shipping costs are CHF 31.00.   Shipping costs long version:   The long track version 2.2m is shipped by freight forwarding. The costs for shipping amount to a total of CHF 74.00.

The Motion Encoder Cart and Receiver is for users of the Vernier Dynamics Cart and Track System or Vernier Dynamics System who want to add Motion Encoder capability. User Manual - DTS-MEC

Replacement axles and wheels for the standard cart and plunger cart. Sold in pairs of two axles, each with two wheels permanently attached. Purchase this part to replace damaged wheels, axles, or bearings. User Manual - WHEELS-VDS

Add the Vernier Optics Expansion Kit to your Dynamics Cart and Track System to conduct optics experiments, such as image formation with lenses and light intensity vs. distance. You can even use the kit to build a basic telescope. What's included Combination LED point and luminous light source with power supply Three lenses integrated with holders (100, 200, and —150 mm focal length) Screen and holder Light Sensor holder Aperture screen and holder Power supply User Manual - OEK-INTL

The Eddy Current Brake attaches to the end of your Go Direct Sensor Cart, Standard Cart, Plunger Cart, or Motion Encoder Cart to create an electromagnetic drag. What's included 1 Eddy Current Brake attachment for plastic carts 4 Magnet tabs User Manual - DTS-ECB

Experiments in additive and subtractive color mixing can be easily and conveniently carried out using the Vernier Color Mixer Kit. User Manual - CM-OEK-INTL

The Mirror Set for the Optics Expansion Kit extends the kit to allow students to easily study image formation by concave and convex mirrors. What's included Fixed Convex Mirror (-200 mm focal length) Half Screen Adjustable Concave Mirror (200 mm focal length) User Manual - M-OEK

The Track-to-Track Coupler rigidly connects two tracks for larger experiments and demonstrations. For use with Dynamics Cart and Track System Dynamics Cart and Track System with Go Direct® Sensor Cart User Manual - T2T-VDS