Go Direct® Surface Temperature Sensor

This probe is designed for outdoor temperature sensing or for measuring temperature at various depths in lakes and streams. It has a 30 m (100 ft) cable. Range:–50˚C to 150˚C Typical Accuracy:±0.2°C Typical Resolution:0.07°C User manual

A simple and rugged sensor designed to measure temperature in the range of –200ºC to 1400ºC. Low cost and a wide temperature range make the Thermocouple an economical, versatile temperature sensor. This sensor uses type-K thermocouple wire to and can be used to measure flame temperatures as high as 1400˚C, or liquid nitrogen temperatures at -196˚C. The Thermocouple has an internal ice-point compensation chip, so you do not need to place a reference wire in an ice-water bath. You can simply use one measuring lead to take temperature readings. Each Thermocouple is individually calibrated. Typical Accuracy:0ºC to 900ºC: ±2.2º–200ºC to 0ºC: ±5ºC900ºC to 1400ºC: ±15ºC Typical Resolution:0.40ºC User manual

Description Designed to be used as you would use a thermometer for experiments such as the recrystallization of benzoic acid, simple and fractional distillations, determination of boiling points, the synthesis and analysis of aspirin and other organic compounds, and more. Range of –20 to 330°C allows for investigations such as determining the melting point of caffeine or the boiling point of different vegetable oils RTD (Resistance Temperature Detector) technology establishes a ±0.5°C accuracy. Rechargeable Battery—Ready When You Are The robust rechargeable battery offers long battery life and provides always-ready operation when using the sensor wirelessly. Monitor battery life directly from our free Graphical Analysis™ 4 app or LabQuest 2 App. Should the battery run low, simply connect the sensor to the charging cable and keep on collecting—no interruptions or inconvenience to you or your students. Wired or Wireless—The Flexibility to Choose Our Go Direct sensors connect directly to your mobile device, Chromebook™, or computer using our free Graphical Analysis™ 4 app—no additional equipment or software purchases are necessary. Go Direct sensors can be used wired via USB or wirelessly via Bluetooth® wireless technology, allowing you to choose the solution best for your classroom or laboratory.  Specifications Range: –20 to 330°C Maximum temperature that the sensor can tolerate without damage: 380°C Temperature detector: Platinum RTD (100 Ohm) Accuracy: ±0.2°C at 100°C Response time (from 25°C to 100°C in water): 30 seconds Probe dimensions: Probe length (handle plus body): 24.5 cm Stainless steel body: Length: 17 cm Diameter: 6.4 mm Probe handle: Length: 6.8 cm Width: 2.25 cm Thickness: 1.3 cm Connections: Wireless: Bluetooth Wired: USB

The Surface Temperature Sensor is designed for use in situations in which low thermal mass or flexibility is required, or for a skin temperature measurement. The Surface Temperature Sensor has an exposed thermistor that results in an extremely rapid response time. This design allows for use in air and water. For temperature measurements in harsher environments that require a more durable probe, we recommend our Stainless Steel Temperature Probe (TMP-BTA). Temperature range:–25 to 125°C (–13 to 257°F) Typical Resolution:0.08°C (–25 to 0°C)0.03°C (0 to 40°C)0.1°C (40 to 100°C)0.25°C (100 to 125°C) Accuracy:±0.2°C at 0°C±0.5°C at 100°C User manual

The Stainless Steel Temperature Probe is a rugged, general-purpose temperature sensor that can be used in organic liquids, salt solutions, acids, and bases. Use it as you would use a thermometer for experiments in chemistry, physics, biology, Earth science, and environmental science. Temperature range:–40 to 135°C (–40 to 275°F) Typical Resolution:0.17°C (–40 to 0°C)0.03°C (0 to 40°C)0.1°C (40 to 100°C)0.25°C (100 to 135°C) Accuracy:±0.2°C at 0°C±0.5°C at 100°C User manual

La sonda di temperatura Go Direct è un robusto sensore di temperatura per uso generale che gli studenti possono utilizzare per monitorare la temperatura. Si collega direttamente alla piattaforma in modalità wireless tramite Bluetooth® o via cavo tramite USB. La sonda di temperatura Go Direct, robusta e multiuso, offre agli studenti il vantaggio della connettività ovunque e ovunque si lavori. Essendo anche impermeabile, Go Direct Temperature è più durevole dei sensori che sono semplicemente resistenti all'acqua. A differenza di un termometro tradizionale, Go Direct Temperature consente agli studenti di raccogliere misure di temperatura in tempo reale di un singolo caso o di un periodo di tempo. L'intervallo di temperatura e la funzionalità wireless rendono Go Direct Temperature il sensore ideale per le applicazioni reali. La sonda Go Direct Temperature può essere utilizzata in una varietà di esperimenti: Condurre reazioni endotermiche ed esotermiche. Studiare il congelamento e la fusione dell'acqua. Misurare il contenuto energetico degli alimenti. Esaminare l'assorbimento dell'energia radiante. Monitorare le condizioni ambientali. Specifiche tecniche: Intervallo di temperatura: da -40 a 125°C Intervallo di temperatura di manipolazione: da -10 a 45°C Precisione: ±0,25°C Tempo di risposta (tempo per il 90% della lettura): 20 secondi (in acqua, con agitazione) Connessioni: Senza fili: Bluetooth Con cavo: USB Incluso: Sensore di temperatura Go Direct Cavo micro USB Guida rapida