Digital Extension Cable

CHF 30.50*

Content: 1 Stück

delivery time: usually around 3 weeks

Product number: EXT-BTD

Product information "Digital Extension Cable"

Most of our sensors have cables that are 1.5 m long. There are times, however, that you may wish to have a longer cable. The Digital Sensor Extension Cable can be used with any Vernier sensor that connects to a digital channel of one of our interfaces. The port will be labeled DIG1 or DIG2. Each cable is 2 meters in length.

User Manual - EXT-BTD

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Motion Detector

The Motion Detector is used to measure position, velocity, and acceleration of moving objects. Specifications Range: 0.15 to 6 m Resolution: 1 mm Accuracy: ≤±1.0％ FS What's included Vernier Motion Detector Digital Sensor Cable User Manual - MD-BTD

CHF 285.40*

Digital Sensor Cable

This cable connects Vernier motion detectors and drop counters to the digital (DIG) port on a Vernier interface. User Manual - MDC-BTD

CHF 16.30*

Laser Pointer

This Class 2 (<1 mW) laser pointer can be used with a Vernier Photogate or Go Direct® Photogate to produce a gate that is wider than the normal 7.5 cm spacing, making it possible to measure the speed of an automobile or of a person running. The laser case is made of aluminum, and it uses two AAA batteries (included). The wavelength of the light is 650 nm. A momentary switch (normally off) controls the laser beam. User Manual - LASER

CHF 59.10*

Go! Motion - Single Sensor

Go! Motion is our motion detector that connects directly to a computer or Chromebook USB port—eliminating the need for an additional data-collection interface. Save money when you purchase the Go! Motion Teacher Pack, which includes eight Go! Motion USB motion detectors. Specifications Range: 0.15 to 6 m Resolution: 1 mm Temperature Compensation: Automatic Accuracy: 2 mm Ultrasound Frequency: 50 kHz Power Consumption: 51 mA Power Source: USB/DIG (Computers, LabQuest) or 4 AA batteries (Calculators) What's included Go! Motion Vernier Go! Motion USB cable Go!Motion Teacher Pack 8 Vernier Go! Motion 8 USB cables User Manual - GO-MOT

CHF 324.10*

Photogate

Use the Photogate to study free fall, rolling objects, collisions, and pendulums. Specifications Power req: 5 VDC at 40 mA Infrared source: Peak at 880 nm Dimension: 75 mm gate width Output is high and LED off for unblocked gate Output is low and LED on for blocked gate Beam approximately 9 mm from the end of the gate arms Resolution: 1μs What's included Vernier Photogate (1) Interface cable (1) Accessory rod User Manual - VPG-BTD

CHF 140.60*

BT Photogate Cable

Replacement cable for connecting a Vernier Photogate to a Vernier interface. User Manual - PG-BTD

CHF 12.20*

Picket Fence

Picket Fences have eight opaque bars spaced every 5 cm, silk-screened directly onto clear plastic. Drop the picket fence through a photogate to obtain records of position, velocity and acceleration vs time or to measure g. User Manual - PF

CHF 20.30*

Similar Items

Go! Motion to Calculator Cable

This 84″ cable is used to connect a Go!Motion or CBR 2 to the I/O port of a TI graphing calculator. The cable has the small I/O plug on both ends. The cable can also be used to connect a graphing calculator to the I/O port on a LabPro, CBL 2, or another calculator. The cable is included with a CBR 2.

CHF 15.58*

Laser Pointer Stand

This light-weight tripod is a perfect support for the Laser Pointer or any other laser pointer, which has a 7/16-inch (1.1 cm) outside diameter. A pair of clips attached to the pivoting bracket securely holds the laser in place. This assembly allows you to accurately point the laser at a photogate. User Manual - STAND

CHF 71.30*

Pulley Bracket

The Pulley Bracket attaches an Ultra Pulley to the end of a Vernier Dynamics Cart and Track System. The bracket includes an attachment for a photogate as well. What's included Track attachment with slot Photogate attachment Long bolt, 39 mm Short bolt, 23.4 mm User Manual - B-SPA

CHF 30.50*

Motion Detector Clamp

The Motion Detector Clamp screws into the back of the Motion Detector, and then can be clamped to a variety of objects such as table tops, ring stands, etc. User Manual - MD-CLAMP

CHF 38.70*

Bar Tape

Our timing toys are great to use with photogates or Smart Pulleys. Our Bar Tape is a flexible strip 3 meters long and 1.6 cm wide with opaque bars spaced every 1.525 cm. This strip can be attached to a dynamics cart and pulled through a photogate, taking the place of a "ticker tape" in many mechanics labs. User Manual - TAPE

CHF 18.30*

Ultra Pulley Attachment

Add an Ultra Pulley to your Photogate to monitor motion as a string passes over the pulley, or as the pulley rolls along a table. You can also connect the ultra pulley to our track with the Pulley Bracket. User Manual - SPA

CHF 50.90*