Relative Humidity Sensor
CHF 181.40*
Content:
1 Stück
delivery time: usually around 3 weeks
Product number:
RH-BTA
Product information "Relative Humidity Sensor"
The Relative Humidity Sensor can be used for weather studies, monitoring greenhouses, or determining days when static electrical discharges could be a problem.
Specifications
- Range: 0% to 95%
- Power: 200 µA @ 5 VDC
- Response Time (time for a 90% change in reading):In still air: 60 minutes (typical)
- With vigorous air movement: 40 seconds (typical)
- Typical Resolution: 0.04% RH
- Humidity Sensor Specifications
- Specifications for the IH-3602-L Integrated Circuit Humidity Sensor (at 25°C and 5.0 VDC) are given below:
- Total Accuracy (with saturated salt calibration): ±2% RH
- Total Accuracy (with standard calibration): ±10% RH
- Operating Temperature Range: 0 to 85°C
- Temperature Effect0% RH voltage: ±0.007% RH/°C (negligible)
- 50% RH voltage: –0.11% RH/°C
- 95% RH voltage: –0.22% RH/°C
What's included
Vernier Relative Humidity Sensor
| Bildungsstufe: | Diploma/ Vocational/ Uni, Middle years |
|---|---|
| Fach: | Biology, Vernier, geography, physics |
Login
Skip product gallery
Similar Items
Go Direct® Weather System - Go Direct Weather (sensor only)
CHF 364.90*
Easily monitor a wide variety of environmental factors with just one sensor.
Specifications
Channels
Go Direct Weather System has the following measurement channels:
Wind Speed
Wind Direction
Wind Chill
Temperature
Heat Index
Dew Point
Relative Humidity
Absolute Humidity
Station Pressure
Barometric Pressure
Altitude
Specifications
Wind speed range: 0–30 m/s
Temperature range: –40 to 120°C
Temperature accuracy: ±0.2°C
Humidity range: 0–100%
Humidity accuracy: ±2%
Absolute pressure range: 260–1260 mbar
Absolute pressure accuracy: ±0.2 mbar
Maximum sampling rate: 2 sample/s
Maximum wireless range: 30 m (unobstructed)
What's included
Go Direct Weather System
Go Direct Weather
Go Direct Weather Vane
Micro USB Cable
Go Direct Weather
Go Direct Weather
Micro USB Cable
User Manual - GDX-WTHR
Anemometer
CHF 254.80*
Use the Anemometer to measure wind speed in a variety of experiments. Hold the sensor in your hand to measure wind speed in dynamic environments or use the accessory rod to position it in front of wind tunnels or fans.
Specifications
Range: 0.5 m/s – 30 m/s
Resolution: 1.2 x 10-2 m/s
(LabQuest 2, LabQuest, LabQuest Mini, Go!Link, LabPro)
What's included
Vernier Anemometer
User Manual - ANM-BTA