Vernier Energy Sensor

CHF 234.40*

Content: 1 Stück

delivery time: usually around 3 weeks

Product number: VES-BTA

Product information "Vernier Energy Sensor"

The Vernier Energy Sensor offers an easy way to quantify voltage, current, power, and energy output of small wind turbines and solar panels such as those used in our KidWind Experiment Kits.

Specifications

Source Input Potential Range: ± 30 V
Source Input Current Range: ± 1000 mA

What's included

Vernier Energy Sensor

User Manual - VES-BTA

Bildungsstufe:	Diploma/High School, Diploma/ Vocational/ Uni, Middle years
DataLogger Schnittstellen:	LabQuest, SensorDAQ
Fach:	physics, renewable energy
Fachbereich:	Natur, Mensch, Gesellschaft - NMG, Physik

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessory Items

Anemometer

Use the Anemometer to measure wind speed in a variety of experiments. Hold the sensor in your hand to measure wind speed in dynamic environments or use the accessory rod to position it in front of wind tunnels or fans. Specifications Range: 0.5 m/s – 30 m/s Resolution: 1.2 x 10-2 m/s (LabQuest 2, LabQuest, LabQuest Mini, Go!Link, LabPro) What's included Vernier Anemometer User Manual - ANM-BTA

CHF 254.80*

KidWind Advanced Wind Experiment Kit - Single Kit

Discover advanced aspects of wind turbine technology. Test different blade designs, gear ratios, generators, and devices to measure electrical and weightlifting power. What's included Advanced Wind Experiment Kit Gear Set (8-, 16-, 32-, and 64-tooth gears) (1) Hex Locks (3) Spool (1) Wind Turbine Generator with Wires (1) High Torque Generator with Wires (1) Motor Mount Pack (2) Wind Turbine Hub (1) Power Output Board (1) Nacelle Body Half (2) Tower Base Leg (3) Tower Base Locking Ring (1) Tower Base Hub (1) Plastic Weightlifter Bucket (1) 250 ml Graduated Cylinder (1) Blade Pitch Protractor (1) 20″ Tower (1) 1/2″ Washer (25) Small Water Pump (1) 12″ x 1/4″ Clear Tubing (1) 8″ Hex Shaft with Hub Quick Connect (1) 1/4″ x 5″ Dowels* (25) Power Output Pack* (1) 3″ x 12″ x 3/32″ Balsa Wood Sheet* (5) 3″ x 12″ Chipboard Blade Sheet* (10) 4′ String* (1) Classroom Pack Gear Set (8-, 16-, 32-, and 64-tooth gears) (3) Hex Locks (9) Spool (3) Wind Turbine Generator with Wires (3) High Torque Generator with Wires (3) Motor Mount Pack (4) Wind Turbine Hub (8) Power Output Board (1) Nacelle Body Half (6) Tower Base Leg (9) Tower Base Locking Ring (3) Tower Base Hub (3) Plastic Weightlifter Bucket (3) 250 ml Graduated Cylinder (1) Blade Pitch Protractor (3) 20″ Tower (3) 1/2″ Washer (75) Small Water Pump (1) 12″ x 1/4″ Clear Tubing (1) 8″ Hex Shaft with Hub Quick Connect (3) 1/4″ x 5″ Dowels* (150) Power Output Pack* (3) 3″ x 12″ x 3/32″ Balsa Wood Sheet* (25) 3″ x 12″ Chipboard Blade Sheet* (50) 4′ String* (3) 8 1/2″ x 11″ Chipboard Sheet* (25) This part is a consumable and is excluded from the warranty. Note: The Advanced Wind Experiment Kit and Classroom Pack do not include basic tools (glue, scissors, screwdriver, etc.) or a multimeter. You can measure current and voltage from the turbines using a Go Direct® Energy Sensor, and an optional Vernier Variable Load or Vernier Resistor Board. User Manual - KW-AWX

CHF 385.30*

Renewable Energy with Vernier - Print and E-Book

The Renewable Energy with Vernier lab book features 26 experiments in wind and solar energy. The book contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects, and more. User Manual - REV

CHF 120.20*

KidWind MINI Wind Turbine with Blade Design

Demonstrate the power of the wind with an affordable and rugged wind turbine. Specifications Height: 12 in Maximum blade diameter: 8 in (Mini Turbine), 16 in. (with blade design option) Expected power output: 0-1 watts Table of floor space needed: 6 in. diameter circle What's included Mini Wind Turbine with Blade Design Mini Nacelle Assembly (1) 10″ Mini Aluminum Tower (1) Mini Base (1) Red Blade Set (1) Sound and Light Board (1) Red Alligator Clip Cord (1) Black Alligator Clip Cord (1) Wind Turbine Hub (1) 1/4″ x 5″ Dowels* (25) 3″ x 8″ Chipboard sheet* (10) Blade Pitch Protractor (1) Mini Wind Turbine Mini Nacelle Assembly (1) 10″ Mini Aluminum Tower (1) Mini Base (1) Red Blade Set (1) Sound and Light Board (1) Red Alligator Clip Cord (1) Black Alligator Clip Cord (1) This part is a consumable and is excluded from warranty. Note: The Mini Wind Turbine does not include a multimeter. You can measure current and voltage from the turbines using a Go Direct® Energy Sensor, and an optional Vernier Variable Load or Vernier Resistor Board. User Manual - KW-MWTBD

CHF 152.90*

Vernier Variable Load

With the Vernier Variable Load, students can adjust the knobs to provide resistances between 2 and 200 Ω, allowing them to determine the optimal load on a system. Specifications Maximum Input: 0.3 A Resistance: 2 – 200 Ω What's included Vernier Variable Load Two insulated jumper wires fitted with mini-alligator clips Spare 0.375 A fast blow fuse, inside case User Manual - VES-VL

CHF 181.40*

KidWind Small Water Pump with Tubing

The KidWind Low Voltage Water Pump is a great way to demonstrate power output from the wind and solar kits. It makes comparing different turbine designs easy What's included Low voltage pump with attached wires 30 cm tubing, inner diameter 1/4 inch User Manual - KW-PUMP

CHF 22.40*

Similar Items

High Current Sensor

Use the High Current Sensor in experiments that involve currents larger than 1 A, such as solar panels, hand generators, and other alternative energy projects. Specifications High Current Sensor range ±10 A Maximum voltage input ±40 V Supply voltage 5 VDC Typical Resolution: 4.9 mA Output voltage range 0 – 5 V Replaceable fuse 10 A Current in amperes: Slope 4.51 A/V Intercept –11.31 A What's included Vernier High Current Sensor (1) extra 10 A fuse User Manual - HCS-BTA

CHF 214.00*

Go Direct® Energy Sensor

The Go Direct Energy Sensor quantifies the voltage, current, power, and energy output of small wind turbines and solar panels, such as those used in our KidWind Experiment Kits. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Source input potential range: ±30 V Source input current range: ±1 A What's included Go Direct® Energy Sensor Micro USB Cable User Manual - GDX-NRG

CHF 222.20*

Go Direct® Current Probe

The Go Direct Current Probe measures the electric currents in circuits. It connects via Bluetooth® wireless technology or via USB to your device. Specifications Range: +/- 1 A and +/- 0.1 A Maximum non-damaging current: 1.5 A and 0.5 A Typical resolution: 0.031 mA and 0.003 mA Connections:Wireless: Bluetooth Wired: USB What's included Vernier Go Direct Current Probe Micro USB Cable User Manual - GDX-CUR

CHF 222.20*